Kodak 5600 User Guide - Page 9
Loading the Slide Tray, KODAK CAROUSEL® Slide Projector - slide projectors
UPC - 041771125677
View all Kodak 5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Operation Loading the Slide Tray KODAK Slide Trays are available in 80- and 140-slide capacities. Use a 140-slide tray if you use thin-mounted slides (1/16 in. / 1.6 mm) and need the larger capacity. Use an 80 cpacity tray if any of your slides have thick mounts (1/8 in. / 2.5 mm). Note: Do not attempt to project slides mounted with sticky or loose tape. Place the tray over the center post of the projector. Align the "0" slot with the gate index; the tray will drop into position. If your 140-slide tray does not drop easily, secure the lock ring, invert the tray, and align the index hole with the index notch. Slide and hold the tray release latch in the direction of the arrow, and turn the bottom plate until the index hole and notch align. Then release the latch. If you use an 80-slide tray, rotate the metal plate on the bottom of the tray until it locks into position. 140-Slide Tray KODAK CAROUSEL® Slide Projector 80-Slide Tray 5