Kodak 5600 User Guide - Page 31
See Clearing a Gate Jam on, PROBLEM, CAUSE, CORRECTION
UPC - 041771125677
View all Kodak 5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Troubleshooting PROBLEM Slide fails to drop into projection position Uneven illumination on screen Projector won't cycle to next slide CAUSE Tray base plate not properly indexed Tray not properly positioned on projector Slide mount warped or frayed at corners slide. Projector not level or tilted too high Projection lamp not fully seated Condenser lens not installed or not positioned properly in mount Slide mount not seated properly in projector gate Tray not properly positioned Slide or foreign object stuck in gate CORRECTION Align the index hole and index notch. Reposition tray on projector. Straighten mount or remount slide. Set projector on a stand equal with center of screen. Check lamp. Check condenser lens. Check slide position and slidemount condition. Reposition tray. See "Clearing a Gate Jam" on page 17. 27 KODAK CAROUSEL® Slide Projector