Kodak 8412447 User Guide - Page 70
Energy Saving features of the scanner, Transport timeout, Defining the Scan area, Color/Grayscale
UPC - 041771947477
View all Kodak 8412447 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Energy Saving features of the scanner Transport timeout Blank image detection Defining the Scan area Energy Star allows you to set the amount of time the scanner will remain inactive before the scanner goes into an idle state (sleep mode). Choices are: 0 to 60 minutes. This feature allows you to set a transport timeout value. This value is the amount of time the scanner will wait after the last document enters the transport before the transport timeout action is taken. You can specify a time delay setting from 1 to 300 seconds. The default is 10 seconds. Use the slider bar to specify the image size (KB), below which an image is determined to be blank. Images with sizes less than the size number you select will not be created. If you use this option, you must specify a blank image size for each image type (Bi-tonal, Gray and Color) you want to delete. The default for this option is None, which means that you will keep all images dialog box. The Scan Area dialog box is only available for images when the Cropping option selected on the Scanner Settings dialog box is either Fixed to Transport or Relative to Document cropping. To access the Scan Area dialog box, select Area on the Scanner Settings dialog box. NOTE: Select the side and image to be defined by highlighting Front Color/Grayscale, Front Binary, Back Color/Grayscale, Back Binary or as appropriate based on the cropping option selected for each of these in the Scanner Settings dialog box. The scan areas defined for all camera selections are independent. 66 A-61527 May 2006