Kodak DP900 Reference Manual - Page 24
Connecting a Video Player
View all Kodak DP900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Reference Manual KODAK DP900 / DP1100 Connecting a Video Player 1. If your video player uses a round, one-prong composite video connector, you'll need only the A/V cable that shipped with the projector. • If your video player uses a round, four-prong S-video connector, you'll need an S-video cable in addition to the A/V cable. The S-video cable is sold separately. 2. Plug the A/V cable's yellow connector into the "video-out" port on your video player (Figure 9). This port may be labeled "To Monitor." • If you're using an S-video cable, connect it to the "s-video out" connector on the video player (Figure 9). 3. Plug the other yellow connector into the composite connector on the back of the projector. • If you're using S-video, plug the other end of the cable into the "s-video" connector on the projector (Figure 9). audio/video cable Figure 9 Connecting with the standard A/V cable 20 3/99