Kodak DP900 Reference Manual - Page 54
Problem: the projector displays vertical lines
View all Kodak DP900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Reference Manual KODAK DP900 / DP1100 Problem: Image is too wide or narrow for screen • You might need to manually adjust the tracking to reduce or enlarge the projected image. Refer to "Manual Tracking" on page 36. • Adjust the resolution of your video card if it's greater than 1024x768. Problem: Image is out of focus • Turn the projection lens to focus the image. • Make sure the projection screen is at least 5 feet (1.5 m) from the projector. • Check the projection lens to see if it needs cleaning. Problem: Image and menus are reversed left to right • Rear projection mode is probably turned on. Turn Rear Projection off in the Controls menu. The image should immediately return to forward projection. See "Rear Projection" on page 38. Problem: the projector displays vertical lines, "bleeding" or spots • Adjust the brightness. See "Brightness" on page 32. • Check the projection lens to see if it needs cleaning. Problem: no sound • Adjust volume. • Verify audio/input connections. • Adjust audio source. 52 3/99