Kodak DP900 Reference Manual - Page 40
Controls Menu
View all Kodak DP900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Using the Projector Vertical position Follow these steps to manually adjust the vertical position. 1. Turn Auto Image off. 2. Highlight Vertical position, then press the left mouse button to move the image down or press the right mouse button to move the image up. Positioning adjustments are saved when you power off the projector. Controls Menu Figure 19 Controls menu Video Standard Note: If you already know the video standard used in your geographical area, it's often best to manually select it. When Video standard is set to Auto, the projector attempts to pick the video standard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, or SECAM) automatically based on the input signal it receives. (The video standard options may vary depending on your region of the world.) The input signals for SECAM, PAL-M, and PAL-N video cannot be automatically detected, therefore they must be chosen manually. If the projector is unable to detect the correct standard, the colors might not look right or the image might appear "torn." If this happens, manually select a standard by clicking either mouse button and cycling through the standards. 3/99 37