Kodak I280 User Guide - Page 14

System requirements Minimum system configuration Recommended system configuration To operate the scanner, the following minimum configuration is required. NOTES: The actual performance of the system depends upon the scanning application, choice of scanning parameters, and the host computer configuration. If the scanner is not performing at the optimal speed, a faster computer and/or more RAM may be necessary to obtain the rated throughput. • IBM PC (or compatible) with a Pentium III 1 GHz processor - i260 Scanner: for scanning at 300 dpi with deskew, you will need at least a 1.8 GHz processor for bi-tonal scanning or a 2.5 GHz processor for color scanning. - i280 Scanner: for scanning at 300 dpi with deskew, you will need at least a 2.5 GHz processor for bi-tonal scanning or a 3.2 GHz processor for color scanning. • Microsoft Windows 98SE, Windows Millennium Edition (Me), Windows 2000, or Windows XP • 100 MB of available hard disk space (200 MB is recommended) • 128 MB of RAM • Monitor (VGA) • Mouse To operate the scanner at its optimum speed, the following configuration (or better) is recommended. NOTE: The actual performance of the system depends on the scanning application, choice of scanning parameters, and the host computer configuration. • IBM PC (or compatible) with a Pentium IV 3.2 GHz processor • Microsoft Windows 98SE, Windows Millennium Edition (Me), Windows 2000, or Windows XP • 200 MB of available hard disk space • 512 MB of RAM • Additional memory (SODIMM) installed in the scanner - i250 Scanner: up to 256 MB of memory is allowed - i260 Scanner: up to 256 MB of memory is allowed - i280 Scanner: up to 512 MB of memory is allowed • Monitor (VGA) • Mouse 10 A-61167 April 2005