Konica Minolta AccurioPress C14000 Watkiss PowerSquare 2-Knife Trimmer User Ma - Page 13
The Basic Window, Basic, Button, Side Trim, Size, Trim Size, Trim Offset
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 - The User Interface - The BASIC Window The BASIC Window The BASIC tings. window gives you access to frequently-changed machine set- Button Information SIDE TRIM The side-trim dimension is calculated automatically according to the PAGE SIZE. If needed, the side-trim dimension can be changed. Touch SIDE TRIM to adjust the size of the finished book. The default setting is 2.5mm from each side. The maximum side-trim is 40mm from each side. The minimum side-trim is 1mm from each side. The machine will not permit a setting that conflicts with the stitch position. Change the stitch pitch if necessary. The side-trim function can be turned off. - AUTO Touch AUTO to select the default side-trim position. - TRIM SIZE Touch '+' or '-' to adjust the side-trim dimension. - TRIM OFFSET By default, the book is trimmed equally on both sides. Touch '+' or '-' to move the trim position away from the centre line. The range is -40mm to +40mm, dependent on how much is to be trimmed. The default setting is 0mm. Watkiss P2T 2-Knife Trimmer User Manual 9