Konica Minolta AccurioPress C14000 Watkiss PowerSquare 2-Knife Trimmer User Ma - Page 36
See Remove and, SIDE TRIM COVER
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5 - Error Conditions, Problems and Solutions - Side-Trimmer Message List Message Information Reference SIDE TRIM COVER OPEN The top cover of the side-trimmer is open. Close the top cover of the sidetrimmer. If the message does not clear, open and then close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. SIDE TRIM - no comms Check that the mains power input cable and the communications cable are connected. See "The SideTrimmer" on page 3. Use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. SYSTEM ERROR 41.39 If the side-trimmer setting is 190mm or less, check that the book supports are removed. Otherwise, follow the instructions below for other 41.xx system errors. See "Remove and re-fit the SideTrimmer Book Supports" on page 17. SYSTEM ERROR 41.xx Open the top cover of the sidetrimmer and check for paper trimmings or obstructions. Close the top cover of the side-trimmer. If the message still does not clear, use the side-trimmer mains ON/ OFF switch. Turn the side-trimmer OFF, wait at least 5 seconds and then turn the side-trimmer ON. If the problem continues, then call your service engineer. 32 Watkiss P2T 2-Knife Trimmer User Manual