Konica Minolta Fujitsu fi-6670/fi-6770 Operation Guide - Page 107

Chapter 5 Various Documents 7 Select the application to launch when an event occurs. Select the [Start the program] radio button under [Actions], and then select the application you want to use. 8 Click the [OK] button. This completes the computer settings if you will use a scanning application other than ScandAll PRO. Then, continue to configure settings for your scanner. • The screens and operations may differ slightly depending on the OS you are using. • If you want to link with other buttons here, repeat Steps 5 to 8. 9 Start up ScandAll PRO. 10 Select the [Tool] menu D [Preferences]. ⇒ The [Setup] dialog box appears. 11 Select the [Event] tab. 12 Select the action for the event you selected in Step 7, and then select a profile from the list you want to use for scanning. TOP Contents Index Introduction Scanner Overview Loading Documents How to Use ScandAll PRO Scan Parameters Various Documents Daily Care You need to create the required profile beforehand. For how to create profiles, refer to "3.8 Scanning with [Batch Scan]" (on page 61). 13 Click the [OK] button. 14 Exit ScandAll PRO. When you press the linked button, ScandAll PRO starts up, and a batch scan is executed according to the selected profile's settings. Consumables Troubleshooting Operational Settings Appendix Glossary 107