Konica Minolta PS7000 Twain Driver and Overlay Manager Software Installation a - Page 3
Overview & Hardware Installation - minolta scanner
View all Konica Minolta PS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Section 1 - Overview & Hardware Installation Thank you for purchasing a Minolta TWAIN-supported Microform or Publication Scanner. This version of the Minolta TWAIN driver supports the following Minolta scanners: • MS 3000 Microform Scanner • MS 7000 Microform Scanner • MS 2000 Microform Scanner • PS 3000 Publication Scanner • MS 6000 Microform Scanner • PS 7000 Publication Scanner This TWAIN driver and Overlay Manager Software may be freely copied and distributed for use with Minolta Scanners sold in the United States of America or Canada. JFL Peripheral Solutions Inc. of Ottawa, Ontario, Canada developed the TWAIN driver. For information regarding distribution outside of the United States of America or Canada, please contact them at: JFL Peripheral Solutions 1007 Merivale Road, Suite 101 Ottawa, Ontario K1Z 6A6 Voice: (613) 728-2521 x206 Fax: (613) 728-4459 Email: [email protected] Hardware Installation The Minolta scanners utilize industry standard 50-pin, male SCSI-1 (MS 3000, MS 2000, and PS 3000) and SCSI-2 (MS 6000 and MS 7000) connectors. The PS 7000 uses a proprietary cable sold only through Konica Minolta Business Solutions and is a 5-pin Mini Centronics on the scanner end and a 50-pin HD SCSI-2 on the PC side. You will need to supply a standard SCSI interface card for the PC as well as a SCSI cable. We have tested a wide range of SCSI boards and have found that nearly all Adaptec or Adaptec-compatible boards will run fine. We also recommend installing the latest version of Adaptec's ASPI drivers. If you have any connection errors please check for system conflicts first. If you are still unable to resolve any hardware conflicts or cannot get your scanner to be recognized please contact your local Minolta dealer. When calling for technical support please make sure to have the driver version numbers and your system configuration information available. A Note about Integrating Konica Minolta Business Solutions Scanners For those customers who wish to directly integrate one of the TWAIN supported Minolta scanner listed above with their own software, we recommend contacting JFL Peripheral Solutions, Inc. to obtain their ObjectTWAIN® developer's toolkit. This toolkit has all the necessary tools to fully integrate our supported scanners. Note: All sample scanned images in this guide are actual microfilm scans and were enlarged by 200-250% to show detail at the pixel level. They do not represent 1-to-1 resolutions. 2