Konica Minolta PS7000 Twain Driver and Overlay Manager Software Installation a - Page 41
Important Note
View all Konica Minolta PS7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Zoom In - Clicking this button will show an enlarged version of the overlay. This is helpful for previewing what an overlay will look like without having to open it in the Overlay Image Editor. Refresh - Clicking this button will cause the Manager to rescan the SCSI bus to find all attached and available Minolta SCSI scanners and their associated TWAIN data source. Selected scanner - This drop down box will display all available Minolta scanner TWAIN data sources. All settings made in the Configuration Editor will be stored, associated and utilized by the scanner shown in this drop down box. Please note that if multiple machines are connected to the same PC or the same Configuration Editor is used to configure a number of stand-alone direct-print machines, the overlay settings for each will be stored separately. Important Note: If the wrong scanner is selected (i.e. MS 6000 when using an MS 7000 or vice-versa), the orientations and locations of the overlay will be shown incorrectly in the preview window. Selected overlay - This text box shows the current path and file name for the overlay to be used in the selected scanner's current configuration. You must have an overlay selected to use most functionality in the Configuration Editor. Important Note: If you wish to clear the current overlay stored in the scanner's permanent memory, select the clear.ovr overlay and apply it while in static mode. Browse - Click the browse button to search your files for a specific overlay file. Overlay Mode - The Overlay Manager allows you to provide overlays to direct-print output in one of two modes. These modes are referred to as Static and Dynamic: Static - Static mode should be selected when the overlay to be used will not change from print to print (i.e. no date, time or page fields). Once you click the Apply button for an overlay in static mode there will be a 7-8 second delay as the Overlay Monitor goes yellow. This indicates that the overlay data is being uploaded into the selected scanner. Once the monitor goes red and shows an inactive state the overlay has been loaded and there is no longer any need to have the scanner connected to a PC running the overlay software. The actual overlay has now been uploaded into the scanner and will remain there until the Overlay Manger software is used to clear or change the file. Users can now disable the overlay functionality from print to print by using the front panel Clear/Shift and Paper Select buttons to toggle between the 0c (no overlay) and 1c (use static overlay) settings. Dynamic - Dynamic mode should be used whenever the overlay will change from print to print (i.e., time, date or page will be used on the output). This indicates that while the Overlay Monitor is active (green) the PC will upload a