Konica Minolta bizhub 20P bizhub 20P User Guide

Konica Minolta bizhub 20P Manual

Get Konica Minolta bizhub 20P PDF manuals and user guides View all Konica Minolta bizhub 20P manuals
Add to My Manuals
Save this manual to your list of manuals

Konica Minolta bizhub 20P manual content summary:

  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 1
    KONICA MINOLTA Laser Printer USER'S GUIDE You must set up the hardware and install the driver before you can use the printer. Please use the Quick Guide to set up the printer. You can find a printed copy in the box. Please read this User's Guide thoroughly before you use the printer. Keep the CD/DVD
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 2
    specify procedures you must follow or avoid to prevent possible damage to the printer or other object. Electrical Hazard icons alert you to a possible electrical shock. Hot Surface icons warn you not to touch machine parts that are hot. Notes tell you how you should respond to a situation that
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 3
    of a fire, electrical shock, burn or suffocation. Please keep these instructions for later reference and read them before attempting any maintenance. WARNING There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make sure that you have turned off the power
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 4
    the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry, lint-free cloth and dispose of it according to local regulations. Cleaning the outside of the printer: Make sure that you have unplugged the printer from the AC power outlet. Use neutral detergents. Cleaning
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 5
    prevent injury, when you open the front cover or back cover (back output tray) of the printer, DO NOT touch the shaded parts shown in the illustration. If you do this, you may get burned. Inside the printer (Front View) Open the back cover (Back View) Avoid placing your machine in a high-traffic
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 6
    Note DO NOT remove or damage the caution label located on or around the fuser. v
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 7
    bizhub and PageScope are trademarks or registered trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Microsoft, Windows, Windows in this manual has a Software License Agreement specific to its the Printer If for any reason you must ship your printer, carefully package the printer to
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 8
    paper, labels and envelopes 20 Duplex printing...25 Guidelines for printing on both sides of the paper 25 Manual duplex printing ...25 Automatic duplex printing ...29 Booklet printing...31 3 Driver and Software 32 Printer driver ...32 Features in the printer driver (for Windows 34 Using the BR
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 9
    the Printer Settings page...81 Print Fonts ...82 Default settings...83 5 Options 84 Lower tray (PF-P10) ...84 SO-DIMM (memory module)...85 SO-DIMM types ...85 Installing extra memory ...86 6 Routine Maintenance 88 Replacing the consumable items...88 Consumables...88 Toner cartridge ...89 Drum
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 10
    A Appendix 132 Printer specifications...132 Engine ...132 Controller ...133 Software ...133 Control panel ...134 Paper handling ...134 Media specifications ...134 Supplies ...135 ...141 Quick reference for bar code control commands 142 Print bar codes or expanded characters 142 B Index 150 ix
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 11
    parts. About this Printer1 1 1 1 Printer Quick Guide Safety Information Guide CD/DVD-ROM AC Power Cord Drum Unit and Toner Cartridge 6 feet (2.0 meters). DO NOT connect the interface cable at this time. Connecting the interface cable is done during the printer driver installation process. Make
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 12
    About this Printer Third party USB ports are not supported by Macintosh. „ Parallel cable 1 DO NOT use a parallel interface cable that is longer than 6 feet (2.0 meters). Use a shielded interface cable that is IEEE 1284-compliant. „ Network cable Use a straight-through Category5 (or greater)
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 13
    1 2 3 7 9 6 4 5 8 1 Front Cover Release Button 2 Control Panel 3 Face-down Output Tray Support Flap 1 (Support Flap 1) 4 Front Cover 5 Paper Tray 6 Power Switch 7 Face-down Output Tray 8 Multi-purpose Tray (MP Tray) 9 Face-down Output Tray Support Flap 2 (Support Flap 2) About this Printer 1 1 3
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 14
    Back view  ! & % $ " 1 Back Cover (Back Output Tray) 2 Duplex Tray 3 AC Power Connector 4 10BASE-T / 100BASE-TX (Ethernet) Port 5 Network Activity LEDs (Light Emitting Diodes) 6 USB Interface Connector 7 SO-DIMM (memory) Cover 8 Parallel Interface Connector About this Printer 1 1 # 4
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 15
    Read the following before you use the printer. 1 1 Power supply 1 Use the printer within the recommended power range. Power source: USA and Canada: AC 110 to 120 V, 50/60 Hz Europe and Australia: AC 220 to 240 V, 50/60 Hz The power cord, including extensions, should be no longer than 5 meters
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 16
    printer driver and this guide are as follows: 2 2 2 Paper tray Multi-purpose tray Optional lower tray unit Duplex unit for automatic duplex printing Tray 1 MP Tray Tray 2 / Tray 3 DX When looking at this page Thin paper 60 g/m2 to 75 g/m2 p (16 to 20 lb) Thick paper 105 g/m2 to 163 g/m2 (28
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 17
    Printing Methods Media type Envelopes Tray 1 Tray 2/ Tray 3 MP Tray p Up to 3 sheets DX Choose the media type from the printer driver Envelopes Env. Thin 2 Env. Thick Tray 1 Tray 2/ Tray3 to 16 in.) Number of sheets (80 g/m2 / 20 lb) 250 sheets 250 sheets / 250 sheets 50 sheets 7
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 18
    USA Xerox 4200 20 lb 2 Hammermill Laser Print (24 lb=90g/m2) Recycled paper Xerox Recycled Supreme 80 g/m2 (Not supported) Transparency 3M CG3300 3M CG3300 Labels Avery laser label L7163 Avery laser labels white #5160 Envelope Antalis River series (DL) (No specific brand recommended
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 19
    . „ DO NOT use envelopes that were previously printed by a laser printer. „ DO NOT use envelopes that cannot be arranged when put in a pile. „ DO NOT use envelopes that are made of paper that weighs more than the paper weight specifications for the printer. „ DO NOT use envelopes that have been
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 20
    is shown in the table below: Note 2 When using BR-Script emulation, the edges of the paper that cannot be printed on are 4.32 mm (0.17 in). Portrait 2 A4 1 4.23 mm (0.16 in.) 2 6.01 mm (0.24 in.) 3 4.23 mm (0.16 in.) 4 6.01 mm (0.24 in.) Letter 4.
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 21
    Transparencies are only for Tray1. (For the recommended paper to use, see About paper on page 6.) a Pull the paper tray completely out of the printer. Printing Methods 2 2 2 2 b While pressing the blue paper-guide release lever (1), slide the paper guides to fit the paper size. Make sure that the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 22
    Printing Methods Note For Legal or Folio size paper, press the release button (1) in the sure that the paper is below the maximum paper mark (bbb). The side to be printed on must be face down. IMPORTANT Make sure the paper guides touch the sides of the paper so it will feed properly. d Put the paper
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 23
    Printing Methods e Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer. 2 1 13
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 24
    Printing Methods f Choose the following from the printer driver: Paper Size......(1) Media Type......(2) Paper Source......(3) and any other settings you may want to make. (See Chapter 3: Driver and Software.) 2 „ Windows® printer driver  „ BR-Script printer driver for Windows®  ! !
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 25
    „ Macintosh printer driver  Printing Methods 2 ! g Send the print data to the printer. IMPORTANT When printing on transparencies, remove each transparency at once after printing. Stacking the printed transparencies may cause a paper jam or the transparency to curl. 15
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 26
    from the MP tray (For the recommended paper to use, see About paper on page 6.) a Open the MP tray and lower it gently. Printing Methods 2 2 b Pull out the MP tray support flap (1). 1 c Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 27
    sure that the paper stays under the maximum paper mark (b) on both sides of the tray. The side to be printed on must be face up with the leading edge (top of the paper) in first. 2 e While pressing the paper-guide release lever (1), slide the paper guide to fit the paper size. 1 17
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 28
    Printing Methods f Choose the following from the printer driver: Paper Size......(1) Media Type......(2) Paper Source......(3) and any other settings you may want to make. (See Chapter 3: Driver and Software.) 2 „ Windows® printer driver  „ BR-Script printer driver for Windows®  ! !
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 29
    „ Macintosh printer driver  Printing Methods 2 ! g Send the print data to the printer. IMPORTANT When printing on transparencies, remove each transparency at once after printing. Stacking the printed transparencies may cause a paper jam or the transparency to curl. 19
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 30
    from the MP tray through to the back of the printer. Use this paper feed and output method when you want to print on thick paper, labels or envelopes. (For the recommended paper to use, see About paper on page 6 and Types of envelopes on 2 page 9.) a Open the back cover (back output tray). b
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 31
    d Pull out the MP tray support flap (1). Printing Methods 2 1 e Put paper in the MP tray. Make sure that Envelope joints that are sealed by the manufacturer should be secure. • The side to be printed on must be face up. • All sides of the envelope should be properly folded without wrinkles or creases.
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 32
    Printing Methods g Choose the following from the printer driver: Paper Size......(1) Media Type......(2) Paper Source......(3) and any other settings you may want to make. (See Chapter 3: Driver and Software.) 2 „ Windows® printer driver  „ BR-Script printer driver for Windows®  ! ! 22
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 33
    Paper size on page 138.) „ Macintosh printer driver  ! Note For other envelopes which are not listed in the printer driver, such as Envelope #9 or Envelope C6, choose Custom Page Sizes. (For more information on envelope sizes, see Paper size on page 138.) h Send the print data to the printer. 23
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 34
    may cause the paper to jam or curl. • If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to increase the fixing temperature. • If envelopes are creased after they are printed, see Improving the print quality on page 124. • (For Windows® users) If DL size
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 35
    that there may be paper jams or poor print quality. (If there is a paper jam, see Paper jams and how to clear them on page 115. If you have a print quality problem, see Improving the print quality on page 124.) Note • The screens in this section are based on Windows® XP. The screens on your
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 36
    in the paper tray with the side to be printed on (blank side) face down. Follow the instructions on the computer screen. 1 Put papers in opposite order when the Back output tray is opened. f The printer will now automatically print all the odd-numbered pages on the other side of the paper. Note • If
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 37
    Printing Methods Manual duplex printing from the MP tray 2 Note Before putting the sheets back in the MP tray, you will have to straighten them, or you may get paper jams. 2 a In the printer driver choose the Basic tab, and choose the Duplex printing mode from the Duplex / Booklet setting, and
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 38
    the instructions on the computer screen. 2 1 Put papers in opposite order when the Back output tray is opened. f The printer will now automatically print all the odd-numbered pages. Paper orientation for manual duplex printing 2 The printer prints the second page first. If you print 10 pages on
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 39
    If you are using the Macintosh Printer Driver, see Duplex Printing on page 59. a Put paper in the paper tray or MP tray. b For the Windows® printer driver 1 Open the Properties dialog box in the printer driver. 2 From the General tab, click the Printing Preferences button. 3 From the Basic tab
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 40
    Methods For the BR-Script printer driver 1 Open the Properties dialog box in the printer driver. 2 From the General tab, click the Printing Preferences button. 2 3 From the Layout tab, choose Orientation, Print on Both Sides and Page Order. 4 Click OK. The printer will print on both sides of
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 41
    Unit or Manual Duplex from the Duplex Mode Setting. 6 Click OK. Printing Methods 2 2 For the BR-Script printer driver 1 Open the Properties dialog box in the printer driver. 2 From the General tab, click the Printing Preferences button. 3 From the Layout tab, choose Booklet from the Pages Per
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 42
    Quick Guide. The latest printer driver can be downloaded from the KONICA MINOLTA website at http://konicaminolta.com/. (If you want to uninstall the printer driver, see Uninstalling the printer driver on page 67.) For Windows® 3 „ Windows® printer driver (the most suitable printer driver for
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 43
    „ Header-Footer Print 3 „ Toner Save Mode „ Administrator 3 „ Use Reprint 1 3 „ Sleep Time „ Macro 1 3 „ Page Protection 1 3 „ Density Adjustment 2 „ Error Message Printout 1 3 „ Improve Print Output 1 These settings are not available with the BR-script printer driver for Windows®. 2 These settings
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 44
    in the printer driver (for Windows®) 3 (For more information, see the Help text in the printer driver.) Note • The screens in this section are on based Windows® XP. The screens on your computer will vary depending on your operating system. 3 • You can access the Printing Preferences dialog
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 45
    for all the copies selected before the next page of the document is printed. Collate checked Collate non-checked 12 12 11 22 Media Type 3 You can use the following types of media in your printer. For the best print quality, select the type of media that you wish to use. Plain Paper Env
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 46
    „ Text This is the best mode for printing text documents. „ Manual You can change the settings manually by choosing Manual and clicking the Manual Settings... button. You can set brightness, contrast and other settings. Multiple Page 3 The Multiple Page selection can reduce the image size of
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 47
    Duplex Mode • Use Duplex Unit In this mode, the printer prints on both sides of the paper automatically. • Manual Duplex In this mode, the printer prints all the even numbered page first. Then the printer driver will stop and show the instructions required to re-install the paper. When you click
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 48
    tab to select Tray2 or Tray3 from the driver. (See Accessories tab on page 43.) Advanced tab 3 3  ! " # $ % You can set the following in Printer Function: „ Scaling (1) „ Reverse Print (2) „ Use Watermark (3) „ Header-Footer Print (4) „ Toner Save Mode (5) „ Administrator (6) „ Other
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 49
    Click here to change the password. „ Set Click here current password. Then you can change the settings. „ Copies Lock Lock the copy pages selection to prevent multiple copy printing. „ Multiple Page & Scaling Lock Lock the current settings of the Multiple Page and Scaling options to prevent
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 50
    Time „ Macro „ Page Protection „ Density Adjustment „ Error Message Printout „ Improve Print Output 3 3 Use Reprint 3 The printer keeps the last print job sent to it in memory. To reprint the last document, press Go and hold it down for about 4 seconds until all the LEDs light up, and then
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 51
    reserves extra memory for the creation of full-page images. Selections are Auto, Off and Printer Default. The page protection feature allows the printer to create the full-page image to be printed in memory before physically moving the paper through the printer. Use this function when the image is
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 52
    a print quality problem. „ Reduce Paper Curl If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a Thin Paper setting. „ Improve Toner
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 53
    Driver and Software Accessories tab 3 Note From the Start menu, select Control Panel and then Printers and Faxes 1. Right-click the KONICA MINOLTA bizhub 20P icon and select Properties to access the Accessories tab. 1 Printers for Windows® 2000 users. 3 When you install the optional accessories,
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 54
    printer driver. When you click Auto Detect, options that are installed on the printer will be listed in Installed Options(1). You can manually the following printer conditions: • The printer power switch is off. • The printer is in an error state. • The printer is in a network shared environment.
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 55
    Driver and Software Support 3 Note You can access the Support dialog box by clicking Support... in the Printing Preferences dialog box. 3  ! " „ Print Settings (1) This will print the pages that show how the internal settings of the printer have been configured. „ Print Fonts (2) This will
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 56
    For more information, see the Help text in the printer driver.) Note • To use the BR-Script3 printer driver you must install the driver using the Custom Install from the 3 CD/DVD-ROM. • The screens in this section are based on with Windows® XP. • The screens on your computer may vary depending
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 57
    Preferences... in the General tab of the KONICA MINOLTA 20P BR-Script3 Properties dialog box. „ Layout tab 3 You can change the layout setting by choosing the settings for Orientation, Print on Both Sides (Duplex), Page Order and Page Per Sheet. „ Orientation Orientation selects the position of
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 58
    „ Paper/Quality tab Choose the Paper Source. Driver and Software 3 „ Paper Source You can choose Automatically Select, Auto Select, Tray1, Tray2 1, Tray3 1, MP Tray or Manual Feed. 1 Tray2 and Tray3 are options. 48
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 59
    Font (the default) to use equivalent printer fonts for printing documents that contain TrueType fonts. This will permit faster printing; however, you might lose special characters not supported by the printer font. Click Download as Softfont to download TrueType fonts for printing instead of using
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 60
    Envelopes Bond Paper Transparencies „ Toner Save You can conserve toner use with this feature. When you set Toner Save mode to On, print appears lighter. The default setting is Off. Note • We do not recommend Toner Save for printing Photo or Greyscale images. • Toner Save mode is not available
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 61
    the paper curl may be reduced. If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting. „ Improve Toner Fixing If you choose this setting, the toner fixing on paper may be improved. If this
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 62
    printer driver (for Macintosh) This printer supports Mac OS X 10.3.9 or greater. Note The screens in this section are based on Mac OS X 10.5. The screens on your Macintosh will vary depending on your operating system. 3 3 Choosing page setup File, then Page Setup. Make sure bizhub 20P is chosen in
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 63
    Driver and Software „ For Mac OS X 10.5 and 10.6 For more page setup options, click the disclosure triangle beside the Printer pop-up menu. 3 Choosing printing options 3 To control special printing features, choose the options in the Print dialog box. 53
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 64
    can choose Auto Select, Tray1, Tray2 1, Tray3 1, MP Tray 2 or Manual, and specify separate trays for printing the first page and for printing from the second page onwards. 1 Tray2 and Tray3 are options. 2 The printer automatically turns on the Manual Feed mode when you put paper in the Multi-purpose
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 65
    you can also specify the direction of the layout. „ Border If you want to add a border, use this function. „ Two-sided See Duplex Printing on page 59. „ Reverse Page Orientation (For Mac OS X 10.5 and 10.6) Check Reverse Page Orientation to reverse the data from up to down. „ Flip horizontally (For
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 66
    Settings You can change settings by choosing a setting in the Print Settings list: Basic tab Driver and Software 3 3 „ Media Type You can change the media type to one of the following: „ Plain Paper „ Thin Paper „ Thick Paper „ Thicker Paper „ Bond Paper „
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 67
    this feature. When you set Toner Save Mode to On, print appears lighter. The default setting is Off. Note • We do not recommend Toner Save for printing Photo or Greyscale images. • Toner Save Mode is not available for 1200 dpi or HQ 1200 resolution. 3 „ Reverse Print (For Mac OS X 10.3 and 10
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 68
    a print quality problem. „ Reduce Paper Curl If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting. 3 „ Improve Toner
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 69
    Use duplex unit. Select Layout. Choose Long-edge binding or Short-edge binding in Two-Sided. Driver and Software 3 3 „ Manual duplex Select Paper Handling. „ For Mac OS X 10.3 and 10.4 Choose Odd numbered pages and print. Turn the paper over and reload it in the tray, and then choose Even numbered
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 70
    Driver and Software „ For Mac OS X 10.5 and 10.6 Choose Odd Only and print. Turn the paper over and reload it in the tray, and then choose Even Only and print. 3 Status Monitor 3 This reports the printer status (any errors that may happen with the printer) when printing. If you would like to turn
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 71
    3 You need to install the BR-Script3 printer driver using the following instructions. Note If you use a USB cable, only one printer driver per printer can be registered in the Printer Setup Utility (For Mac OS X 10.3 and 10.4) or Print & Fax (For Mac OS X 10.5 and 10.6). Before installing the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 72
    b Open the Utilities folder. c Double-click the Printer Setup Utility icon. Driver and Software 3 d Click Add. For Mac OS X 10.3 users, go to e. For Mac OS X 10.4 or greater users, go to f. 62
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 73
    e Choose USB. Driver and Software 3 f Choose the model name and make sure that KONICA MINOLTA is in Printer Model (Print Using), then select the model name that shows BR-Script in the Model Name (Model), and then click Add. For Mac OS X 10.3 users: 63
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 74
    For Mac OS X 10.4 or greater users: Driver and Software 3 g From the Printer Setup Utility menu, choose Quit Printer Setup Utility. 64
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 75
    „ For Mac OS X 10.5 and 10.6 a From the Apple menu choose System Preferences. b Select Print & Fax. Driver and Software 3 65
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 76
    c Click +. Driver and Software 3 d Choose the Printer Name and choose Select a driver to use... in Print Using, and then choose the Printer Name that shows BR-Script in Model Name, and click Add. e Quit System Preferences. 66
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 77
    2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008 3 a Click the Start button, point to All Programs 1, KONICA MINOLTA and then to your printer name. b Click UnInstall. c Follow the on-screen instructions. 1 Programs for windows® 2000 users Printer driver for Macintosh 3 For Mac
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 78
    Driver and Software e Drag the folder (from the Macintosh HD (Startup Disk), choose Library, Printers, KONICA MINOLTA) into the Trash and then empty the Trash. f Restart the Macintosh. 3 68
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 79
    , view the status and configure basic network settings, such as IP address. The BRAdmin Light utility is available for Windows® 2000/XP, Windows Vista®, Windows® 7 and Windows Server® 2003/2008 computers. For installing BRAdmin Light on Windows®, please see the Quick Guide we provided with the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 80
    . Some applications support these dot matrix printer emulations. Use these emulation modes so your printer will work well when printing from those types of applications. Automatic emulation selection 3 3 This printer has an automatic emulation selection feature that is turned on by default. This
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 81
    of the printer. 2) Toner LED The Toner LED indicates when the Toner is low or at the end of its life. 3) Drum LED The Drum LED indicates when the Drum is nearing the end of its life. 4) Paper LED The Paper LED indicates when the printer is in one of the following states: No paper / Paper jam
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 82
    LED Control Panel Printer status Sleep mode The printer is in sleep mode. Pressing Go wakes up the printer from sleep mode to ready mode. 4 Ready to print The printer is ready to print. Warming up The printer is warming up. The Status LED will turn on for 1 second and off for 1 second. 72
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 83
    of its life. Buy a new toner cartridge and have it ready for when Replace Toner is indicated. The Toner LED will turn on for 2 seconds and off for 3 seconds. Replace toner Replace the toner cartridge with a new one. See Replacing the toner cartridge on page 90. Cartridge error The drum unit assembly
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 84
    Panel Printer status Drum life will end soon The drum unit is near the end of its life. We recommend that you get a new drum unit to replace the current one. See Replacing the drum unit on page 97. The Drum LED will turn on for 2 seconds and off for 3 seconds. 4 Replace drum Replace the drum with
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 85
    in the paper tray or MP tray that is selected in the printer driver, and then press Go. Paper jam (back cover or duplex tray) Clear the paper jam. See Paper jams and how to clear them on page 115. If the printer does not start printing, press Go. The Back Cover LED will turn on for 0.5 seconds
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 86
    PC and printer. Memory full 4 The printer memory is full and the printer cannot print full pages of a document. See Solving print problems on page 130. Print overrun A print overrun occurred and the printer cannot print full pages of a document. See Solving print problems on page 130. Download
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 87
    to print again. If the error is not cleared after turning the power switch off and then back on, press Go and Job Cancel together, the LEDs will light up as shown in the table below to identify the error. LED error indication 4 LEDs Back Cover Toner Fuser unit failure 1 Main PCB failure Laser
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 88
    For example, the LED indication below shows a fuser unit failure. Control Panel 4 Make a note of the indication, referring to the table on page 77, and report the error status to your dealer or KONICA MINOLTA Customer Service. Note Make sure that the front cover is completely closed before you
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 89
    Go to clear the error, and then continue to use the printer. „ Form feed If the yellow Status LED is on for a long time, press Go. The printer will print any remaining data in the printer memory. „ Reprint To reprint the last document, press Go for about 4 seconds until all the LEDs light up and
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 90
    Back Cover, Toner, 4 Drum and Paper LEDs light up. Release Go. Make sure that the Back Cover, Toner, Drum and Paper LEDs are off. d Press Go again. The printer will print a test page. Using the printer driver 4 If you are using the Windows® printer driver, click the Print Test Page button in
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 91
    . c Press Go three times within 2 seconds. The printer will print the current printer settings page. 4 4 4 Using the printer driver 4 If you are using the Windows® printer driver, you can print the current printer settings page by clicking the Print Settings button in the Support dialog. 81
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 92
    , Toner, 4 Drum and Paper LEDs light up. Release Go. Make sure that the Back Cover, Toner, Drum and Paper LEDs are off. d Press Go twice. The printer will print a list of the internal fonts. Using the printer driver 4 If you are using the KONICA MINOLTA Windows® printer driver, you can print
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 93
    that all the LEDs light up to indicate the print server has been reset to its factory default settings. The printer will restart. Factory Reset 4 You can partially reset the machine back to its default printer settings. The settings that will not be reset the Network settings: a Turn off the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 94
    . See SO-DIMM (memory module) on page 85. Lower tray (PF-P10) 5 Two optional lower trays (Tray 2 and Tray 3) can be installed; each lower tray can hold up to 250 sheets of 80 g/m2 (21 lb) paper. When both optional trays are installed, the printer can hold up to 800 sheets of plain
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 95
    5 For purchasing information and part numbers visit the Buffalo Technology website: http://www.buffalo-technology.com/ Note • There might be some SO-DIMMs that will not work with the printer. • For more information, call the dealer you bought the printer from or KONICA MINOLTA Customer Service. 85
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 96
    you install or remove the DIMM. b Remove the DIMM cover. 5 c Unpack the DIMM and hold it by its edges. CAUTION To prevent damage to the printer from static electricity, DO NOT touch the memory chips or the board surface. d Hold the DIMM by the edges and align the notches in the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 97
    5 f Reconnect the interface cable to your printer. Plug the printer back in, and then turn on the power switch. Note To make sure that you have installed the DIMM properly, you can print the printer settings page that shows the current memory size. See Print the Printer Settings page on page 81. 87
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 98
    hot. To prevent injury, when you open the front cover or back cover (back output tray) of the printer, DO NOT touch the shaded parts shown in the illustration. If you do this, you may get burned. Consumables Toner Cartridge See Toner cartridge on page 89. 6 Drum Unit See Drum unit on page 96. 88
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 99
    life of the original toner cartridge that came with the printer may be either a standard 1 or high yield toner cartridge 2, and depends on the model and country you bought the printer in. 1 Standard toner cartridges print approximately 3,000 A4 or Letter-size single-sided pages. Approx. cartridge
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 100
    ensure high quality printing, we recommend that you use only genuine toner cartridges. When you want to buy toner cartridges, call your dealer. • We recommend that you clean the printer when you replace the toner cartridge. See Cleaning on page 101. a Make sure that the printer is turned on. Open
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 101
    assembly. Routine Maintenance IMPORTANT We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner. 6 To prevent damage to the printer caused by static electricity, DO NOT touch the electrodes
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 102
    off with cold water at once. 6 To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. Note • Be sure to seal up the toner cartridge tightly in a bag so that toner powder does not spill out of the cartridge. • Refer to following URL for recycling information. US
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 103
    before you put it in the printer. If toner cartridges are left unpacked for a long time the toner life will be shortened. 6 If an unpacked drum unit is put in direct sunlight or room light, the unit may be damaged. CAUTION Put the toner cartridge in the drum unit immediately after you have
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 104
    this optimum performance if toner or toner cartridges of other specifications are used. KONICA MINOLTA does not therefore recommend the use of cartridges other than genuine KONICA MINOLTA branded cartridges with this machine. If damage is caused to the drum unit or other part of this machine as
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 105
    return the tab to the home position (a) (1). If you do not, printed pages may have a vertical stripe. h Put the drum unit and toner cartridge assembly back in the printer. Close the front cover. Note DO NOT turn off the printer power switch or open the front cover until the Status LED lights up. 95
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 106
    determine the actual drum life, we cannot guarantee a minimum number of pages that will be printed by your drum. • For best performance, use only genuine toner. The printer should be used only in a clean, dust-free environment with adequate ventilation. • Printing with a third-party drum unit may
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 107
    inside of the printer.See Cleaning on page 101. When you replace the drum unit with a new one, you need to reset the drum counter by completing the following steps: a Press the front cover release button and then open the front cover. 6 b Take out the drum unit and toner cartridge assembly. 97
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 108
    . 6 c Push down the blue lock lever and take the toner cartridge out of the drum unit. WARNING DO NOT put a toner cartridge into a fire. It could explode, resulting in injuries. Use neutral detergents when cleaning the printer. DO NOT use cleaning materials that contain ammonia, alcohol, any
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 109
    avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations. 6 d Unpack the new drum unit. IMPORTANT Wait to unpack a drum unit until immediately before you put it in the printer. Exposure to direct sunlight or room light may damage the drum unit. e Put the toner cartridge
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 110
    the drum unit and toner cartridge assembly back in the printer. Routine Maintenance g Press and hold down the Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. 6 IMPORTANT Do not reset the drum counter when you only replace the toner cartridge. h Close
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 111
    and inside of the printer regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure that you clean the inside of the printer. If printed pages are stained with toner, clean the inside of the printer with a dry, lint-free cloth. Cleaning the outside
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 112
    outside of the printer with a dry, lint-free cloth to remove dust. Routine Maintenance d Remove anything that is stuck inside the paper tray. e Wipe the inside of the paper tray with a dry, lint-free cloth to remove dust. 6 f Put the paper tray back in the printer. g Plug the printer back in, and
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 113
    Cleaning the inside of the printer a Turn off the printer power switch and then unplug the printer. Routine Maintenance 6 b Press the front cover release button and then open the front cover. 6 c Take out the drum unit and toner cartridge assembly. 103
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 114
    After you have just used the printer, some internal parts of the printer will be extremely hot. Wait for the printer to cool down before you touch the internal parts of the printer. IMPORTANT 6 We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 115
    d Wipe the scanner window with a dry, lint-free cloth. Routine Maintenance 6 e Put the drum unit and toner cartridge assembly back in the printer. f Close the front cover. g Plug the printer back in, and then turn on the power switch. 105
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 116
    , clean the paper pick-up roller as follows: a Turn off the power switch and unplug the printer. 6 b Unplug the power cord and interface cable from the printer. c Pull the paper tray out of the printer. d Dampen a soft cloth with lukewarm water and wipe the separator pad (1) in the paper tray with
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 117
    e Wipe the two paper pick-up rollers (1) inside the printer. 1 f Put the paper tray back in the printer. Routine Maintenance 6 g Make sure that you have turned off the power switch, and then connect the power cord and interface cable to the printer. h Plug in the power cord and turn on the power
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 118
    Cleaning the corona wires Cleaning the corona wire If you have print quality problems, clean the corona wire as follows: a Press the front cover release button and then open the front cover. Routine Maintenance 6 6 6 b Take out the drum unit and toner cartridge assembly. 108
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 119
    from right to left and left to right several times. 1 Note Be sure to return the tab to the home position (a) (1). If you do not, printed pages may have a vertical stripe. d Put the drum unit and toner cartridge assembly back in the printer. Close the front cover. 109
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 120
    help, visit us at http://konicaminolta.com/. Identifying your problem First, check the following: „ The AC power cord is connected properly and the printer is turned on. „ All of the protective parts have been removed. „ The toner cartridge and drum unit are installed properly. „ The front and back
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 121
    problems with the printer. Take the necessary action by referring to the following table. If you want to turn the status monitor on, see Status Monitor on page 45 (For Windows® user) or Status Monitor on page 60(For Macintosh users). Error message Action Cartridge Position Error „ Put the drum
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 122
    page 86. „ Change the following settings in the supplied Windows® driver and try again. The best combination of these settings will vary depending on your document: „ Graphics mode „ TrueType mode „ Use Printer TrueType® Fonts 1 Service call error 1 Choose the Basic tab, choose Manual in Print
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 123
    can also report problems by printing an error message. Use the table below to identify and clear the error message. The default setting for the error message printout is off. If you want to turn the error message printout on, from the Advanced tab of the Windows® printer driver click the Other
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 124
    Paper jams and how to clear them on page 115.) The printer does not print. „ Make sure that the cable is connected to the printer. „ Make sure the printer is powered on and that no error LEDs are lit on the printer control panel. „ Make sure that you have chosen the correct printer driver. When
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 125
    Troubleshooting Paper jams and how to clear them 7 Jam MP tray / Tray1 / Tray2 / Tray3 / Inside 7 If a paper jam occurs inside the MP tray or paper tray, the printer will flash the Paper LED as shown below. 7 CAUTION After you have just used the printer, some internal parts of the printer will be
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 126
    Troubleshooting Note • Always remove all paper from the paper tray and straighten the stack when you add new paper. This helps prevent multiple sheets of paper from feeding through the printer at one time and prevents paper jams. • Please confirm that you have installed both a toner cartridge and a
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 127
    Troubleshooting IMPORTANT We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner. To prevent damage to the printer caused by static electricity, DO NOT touch the electrodes shown in the illustration
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 128
    toner cartridge out of the drum unit. Clear the jammed paper if there is any inside the drum unit. 7 IMPORTANT Handle the toner cartridge carefully. If toner scatters on your hands or clothes, wipe or wash it off with cold water at once. To avoid print quality problems, DO NOT touch the shaded parts
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 129
    Troubleshooting g Put the toner cartridge back into the drum unit until you hear it lock into place. If you put the cartridge in properly, the blue lock lever will lift automatically. h Open the front cover. Put the drum unit and toner cartridge assembly back in the printer. 7 i Put the paper tray
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 130
    Troubleshooting Jam Rear / Duplex 7 If a paper jam occurs behind the back cover (back output tray) or inside the duplex tray, the printer will flash the Back Cover and Paper LED as shown below. CAUTION 7 After you have just used the printer, some internal parts of the printer will be extremely
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 131
    Clear the jammed paper as follows. a Press the cover release button and then open the front cover. Troubleshooting 7 b Slowly take out the drum unit and toner cartridge assembly. The jammed paper will be pulled out with the drum unit and toner cartridge assembly. IMPORTANT We recommend that you
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 132
    the back cover. Troubleshooting d Pull the tabs at the left and right hand sides toward you to open the fuser cover (1). 7 1 e Using both hands, gently pull the jammed paper out of the fuser unit. CAUTION After you have just used the printer, some internal parts of the printer will be extremely
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 133
    the drum unit and toner cartridge assembly back in the printer (press firmly). g Fully close the front and back covers. h Pull the duplex tray completely out of the printer. Troubleshooting i Pull the jammed paper out of the printer or the duplex tray. 7 j Put the duplex tray back in the printer
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 134
    page is too light, Toner Save Mode may be on. Turn off Toner Save Mode in the printer Properties tab of the driver. „ Put in a new toner cartridge. See Replacing the toner cartridge on page 90. Faint „ Put in a new drum unit. See Replacing the drum unit on page 97. 7 „ You may clear the problem
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 135
    MINOLTA Customer Service. 7 All black White lines across the page „ Make sure that you use paper that meets our specifications. A rough surfaced paper or thick print media can cause problems. „ Make sure that you choose the proper media type in the printer driver. „ The problem may disappear
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 136
    new toner cartridge. See Replacing the toner cartridge on page 90. „ Make sure that you use paper that meets our specifications. See About paper on page 6. Black toner marks across the page „ If you use label sheets for laser printers, the glue from the sheets may sometimes stick to the OPC drum
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 137
    Troubleshooting Examples of poor print quality Recommendation „ Check the paper type and quality. High temperatures and high humidity will cause paper to curl. See About paper on page 6. „ If you do not use the printer often, the paper may have been in the paper tray too long. Turn over the stack
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 138
    the up position. Poor Fixing 7 „ Choose Improve Toner Fixing mode in the printer driver. See Improve Print Output in Advanced tab on page 38 (For Windows® printer driver), Advanced options on page 49 (For BR-Script printer driver for Windows®) or Print Settings on page 56 (For Macintosh). If this
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 139
    Troubleshooting Examples of poor print quality Recommendation „ Lift up the Face-down Output Tray Support Flap 2 (Support Flap 2) (1). 1 Curled „ Choose Reduce Paper Curl mode in the printer driver. See Improve Print Output in Advanced tab on page 38 (For Windows® printer driver), Advanced
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 140
    Troubleshooting Solving print problems 7 Problem Recommendation The printer prints unexpectedly „ Make sure that the printer cable is not too long. We recommend that you use a or it prints garbage data. parallel or USB cable that is no longer than 2 meters (6.5 feet). „ Make sure that the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 141
    Troubleshooting Network problems 7 For problems concerning using your printer on a Network, see the Network User's Guide on the CD/DVDROM we have supplied. Click Documentation on the menu screen. Other problems 7 For Macintosh with USB 7 Problem Recommendation The printer does not appear in „
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 142
    AppendixA A Appendix A Printer specifications Engine Model bizhub 20P Technology Electrophotographic Print speed 1 Standard (A4/Letter) (A4 size/ Letter Auto Duplex (A4/Letter) size) Up to 30 ppm (A4 size) 2, Up to 32 ppm (Letter size) 2 Up
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 143
    0 Model bizhub 20P Printer driver Windows® 1 PCL driver for Windows® 2000 Professional, Windows® XP Home Edition, Windows® XP Professional Edition, Windows® XP professional x64 Edition, Windows Server® 2003, Windows Server® 2003 x64 Edition, Windows Vista®, Windows Server® 2008, Windows® 7 BR
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 144
    tray Paper tray (Standard) Lower tray (Option) Face-down Face-up Manual Duplex Automatic Duplex 1 Calculated with 80 g/m2 (20 lb) paper Media specifications 50 sheets 250 sheets 250 sheets 150 sheets 1 sheet Yes Yes bizhub 20P A 0 Model Media types Multi-purpose tray Paper tray Media weights
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 145
    Appendix Supplies 0 Toner Cartridge Drum Unit Model High yield cartridge bizhub 20P Approx. 8,000 pages A4/Letter pages 1 Approx. 25,000 pages A4/Letter pages 1 Approx. cartridge yield is declared in accordance with ISO/IEC 19752. Dimensions / weights Order No. TNP24 DR-P01 0 Model
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 146
    Platform & Operating System Version Processor Minimum Minimum Recomm Hard Disk Speed RAM ended Space to RAM install Supported PC Interface 2 Windows® Operating System 1 Windows® 2000 Professional Windows® XP Home Edition Intel® Pentium® II or equivalent 64 MB 128 MB 256 MB 50 MB USB, 10
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 147
    is suitable for laser printers. Use paper that is suitable for laser printers. Basis weight 0 The basis weight of the paper in general use varies in different countries. We recommend that you use paper that weighs 75 to 90 g/m2 (20 to 24 lb), although this printer is able to print on thinner or
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 148
    package is the print side. Follow the indications on the paper package. Typically, the print side is indicated the paper changes greatly. The fixing of the toner may become worse. For storage of the paper A 64 17 75 20 90 24 105 28 120 32 135 36 163 43 90 200 53 110 Paper size
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 149
    Paper size Envelope C5 B5 (JIS) B5 (ISO) B6 (ISO) Folio A4 Long Envelope DL-L 3 × 5 mm 162 × 229 mm 182 × 257 mm 176 × 250 mm 125 × 176 mm 210 × 405 mm 220 × 110 mm Appendix in. 8.5 × 13 in. 3 × 5 in. A 139
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 150
    1.0 (or greater) for Windows® and Safari 1.3 (or Print Settings. For that instructions, See Print the Printer Settings page on page 81. c Click Printer Settings. d Enter a user name and a password. Note The login name for the Administrator is "admin" (case sensitive) and the default password
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 151
    / 7 Latin / Greek (12N) ISO8859 / 15 Latin / Cyrillic (10N) Math-8 (8M) MS Publishing (6J) PC8 Bulgarian (13R) PC8 Greek Alternate (437G) (14G) PC8 PC Nova (27Q) PC775 (26U) PC851 Greece (10G) PC853 Latin3 (Turkish) (18U) PC857 Latin5 (Turkish) (16U) PC860 Portugal (20U) PC863 Canadian French (23U
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 152
    commands 0 The printer can print bar codes in the HP LaserJet emulation modes. Print bar codes or expanded or 'T131' n = 't132' or 'T132' n = 't133' or 'T133' n = 't134' or 'T134' CODE 39 (default) Interleaved 2 of 5 FIM (US-Post Net) Post Net (US-Post Net) EAN 8, EAN 13, or UPC A UPC E Codabar
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 153
    or 'S0' n = 's1' or 'S1' n = 's3' or 'S3' 3: 1 (default) 2: 1 2.5: 1 This parameter chooses the bar code style as above. When the EAN 8, EAN this bar code style parameter is ignored. Expanded Character 'S' 0 = White 1 = Black 2 = Vertical stripes 3 = Horizontal stripes 4 = Cross hatch For
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 154
    OFF All others This parameter shows whether the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. The default setting is determined by the bar code mode
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 155
    shown in the 'u'- or 'U'-specified unit. The default setting of the bar code height (12 mm, or 'B' 0 A Data that follows 'b' or 'B' is read in as bar code data. Bar code data must end 'D' are valid and one digit of data can be printed. Upper-case and lower-case alphabet characters can be accepted
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 156
    bar code data being printed as normal print data. If the check digit is not correct, the printer decides the correct check digit be individually selected. Set A shows characters Hex 00 to 5F. Set B includes characters Hex 20 to 7F. Set C includes the pairs 00 to 99. Switching is allowed between the
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 157
    terminator. Line block drawing 0 ESC i ... V (or v) 'V' or 'v' is a terminator. Expanded character data start 0 n = 'l' or 'L' Data that follows 'l' or 'L' is read as expanded character data (or labeling data). Expanded character data must end with the ' \ ' code (5CH), which also ends this
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 158
    VT 12 12 NP 13 13 CR 14 14 SO 15 15 SI 16 16 DLE 17 17 DC1 18 18 DC2 19 19 DC3 20 20 DC4 21 21 NAK 22 22 SYN 23 23 ETB 24 24 CAN 25 25 EM 26 26 SUB 27 27 ESC 28 28 FS
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 159
    Example Program Listings WIDTH "LPT1:",255 'CODE 39 LPRINT CHR$(27);"it0r1s0o0x00y00bCODE39?\"; 'Interleaved 2 of 5 LPRINT CHR$(27);"it1r1s0o0x00y20b123456?\"; 'FIM LPRINT CHR$(27);"it3r1o0x00y40bA\"; 'Post Net LPRINT CHR$(27);"it4r1o0x00y60b1234567890?\"; 'EAN-8 LPRINT CHR$(27);"
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 160
    Network 69 Network connectivity 133 Network default settings 83 No paper 74 No tray 75 P Paper 6, 137 Paper handling 134 Paper jams 75 Paper pick-up roller 106 Parallel interface 70 PCL printer driver 34 Plain paper 8 Power supply 5 Print a test page 80 Print overrun 76 Printer driver
  • Konica Minolta bizhub 20P | bizhub 20P User Guide - Page 161
    79 Resolution 36 S Scanner window 105 Service call 77 Size mismatch 75 Sleep time 41, 51, 58 SO-DIMM 85 Software 69 Specifications 132 Status Monitor 111 Symbol 140 T Toner cartridge 89 Toner low 73 Too many trays 76 Trademarks vi Troubleshooting 110 U Unprintable area 10 USB
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
USER’S GUIDE
KONICA MINOLTA Laser Printer
You must set up the hardware and install the driver before you can use the printer.
Please use the Quick Guide to set up the printer. You can find a printed copy in the box.
Please read this User's Guide thoroughly before you use the printer. Keep the CD/DVD-ROM in a convenient place
so you can use it quickly if you need to.
A32P-9561-00A