Konica Minolta bizhub 28e bizhub 28e Printer Guide - Page 120
Cannot print documents - drum
View all Konica Minolta bizhub 28e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Cannot print documents Status Things to check Countermeasure Cannot print documents Have you checked the network environment? See chapter 4, "Cannot connect to the network" in "Troubleshooting" in the 1 Administrator's Guide to check the network Is paper loaded? environment. Load the paper properly. For details, see 2 "Loading Paper" in the User's Guide. Has the toner run out? Has Check the screen of the machine, and if the drum cartridge reached a message is displayed, replace the toner 3 the end of its life? cartridge and drum cartridge. For details, see chapter 3, "Replacing consumables" in the Administrator's Guide. 4 Is the system memory of the Check whether the memory capacity of the computer insufficient? computer meets the requirements. If the requirements are not met, increase the memory of the computer. If multiple 5 applications or unnecessary resident Is the printer driver programs are running, close them. Install the printer drivers. For details, see 6 installed? "Installing the driver" (page 1-1). In this case Is the correct printer selected? Select your desired printer in the print menu of the application. Is the printing port correct? Check whether the printing port is correct in the properties screen of the printer driver. See the help, etc. for your computer. If the machine is connected via a USB cable, confirm that "USBxx" (where "xx" refers to the port number) is selected. If the machine is connected via a network, confirm that an lpr port with the same address as the IP address set in the machine is selected. Are you printing from Mac OS X 10.2 via USB cable? When you print from Mac via USB cable, the following settings are not available: Paper Type, Toner Saving, Print Density, Binding Width (Front), and Binding Width (Back). Print via network or upgrade your Mac version to Mac OS X 10.3 or later. Is the right printer driver installed on your computer? When you have installed a network printer driver in advance and then tried to install a driver using plug-and-play, the correct printer driver may not be installed. If the correct printer driver is not installed, reinstall it using the "Add Printer" wizard. For details, see "Installing printer drivers using the "Add Printer" wizard" (page 1-20). Is user authentication set? According to the machine policy, you cannot print documents when user authentication is not set. Set the user authentication in such case. For details, see ""Extended Functions" tab" (page 2-10). Troubleshooting 6-3