Konica Minolta bizhub 4020 bizhub 4020 User Guide - Page 185

Use Timeouts Prolong Screen Timeout On Off Timeouts Print Timeout Disabled 1-255 Timeouts Wait Timeout Disabled 15-65535 Timeouts Job Hold Timeout 5-255 Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never User's Guide To Show a message that lets you reset the screen timeout timer instead of returning to the home screen. Note: Off is the factory default setting. Set the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job. Notes: • 90 is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the scanner checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL emulation. This has no effect on PostScript emulation print jobs. Set the amount of time in seconds the printer waits for additional data before canceling a print job. Notes: • 40 is the factory default setting. • Wait Timeout is available only when the scanner is using PostScript emulation. This has no effect on PCL emulation print jobs. Set the amount of time the printer waits for user intervention before it holds jobs that require unavailable resources and continues to print other jobs in the print queue. Notes: • 30 is the factory default setting. • This menu item appears only when a printer hard disk is installed. Automatically reboot the printer. Note: "Reboot when idle" is the factory default setting. - 185 -