Konica Minolta bizhub 4052 bizhub 4752/4052 Quick Start Guide - Page 63
Loading paper into Tray 1, Lateral Guide, Tray1, Control Panel
View all Konica Minolta bizhub 4052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Loading Paper Chapter 4 4 Loading paper into Tray 1 4.3 3 Load paper into the tray with the print side facing down. % When loading long paper such as A4, letter-size, or legal-size paper, pinch the vertical paper guide tab, and slide the paper guide backward to suit the paper length. % If legal-size paper is loaded, the vertical paper guide tab protrudes from the tray base, and paper may become dusty as a result. To prevent paper from becoming dusty, purchase and mount a dust cover. For details, contact your service representative. % When loading A6-size paper, pinch the vertical paper guide tab, and slide the paper guide to the A6-size position in the center of the tray. % Check that the horizontal Lateral Guide and vertical Lateral Guide match the paper sizes shown on the bottom of the tray. % Do not move paper in the tray. % For details on the available paper sizes, refer to page 4-3. % For details on how to load letterhead paper, refer to [Introduction] in the User's Guide CD. NOTICE Do not load an excessive number of sheets such that the top of the stack is higher than the upper limit indicator mark. If paper is curled, flatten it before loading it. 4 Slide the Lateral Guide to fit the size of the loaded paper. 5 Close Tray1. 6 Change the paper type and paper size on the Control Panel. % To configure settings: [Copy] - [Paper] 4-8 bizhub 4752/4052