Konica Minolta bizhub 4052 bizhub 4752/4052 Quick Start Guide - Page 76
Tap [Scan] or [Scan/Fax]., To redo operations for specifying destinations or option settings
View all Konica Minolta bizhub 4052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6.2 Using the scan function 6 2 Tap [Scan] or [Scan/Fax]. Basic Usage Chapter 6 3 Specify the destination. % You can select the desired destination from the pre-registered destination list, or directly enter destination information. For details on how to register a destination, refer to page 6-20. % Specifying multiple destinations carries out computer sending and fax transmission simultaneously. 4 Specify the size of the original to be scanned. % The size of the original can be specified in [Scan Size] (default: [8-1/2 e 11] (inch area)/[A4] (centimeter area)). If you fail to set the original size correctly, the image may be cut off. 5 Configure Scan option settings as necessary. % For details on option settings, refer to [Scan] in the User's Guide CD. 6 Press the Start key. % If necessary, tap [Check Setting] before sending, and check the specified destination and settings. % To redo operations for specifying destinations or option settings, press the Reset key. Transmission begins. % If you press the Stop key while scanning an original, the scanning process stops, and a list of stopped jobs appears. To cancel scanning of the original, delete inactive jobs from the list. bizhub 4752/4052 6-9