Konica Minolta bizhub C20/C20X bizhub C20 Facsimile User Guide - Page 40
Specifying Settings in Utility Menu, General Procedure for Specifying Settings in Utility Menu
View all Konica Minolta bizhub C20/C20X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Specifying Settings in Utility Menu General Procedure for Specifying Settings in Utility Menu 1 Press the + or , key to select UTILITY, and then press the Select key. 2 Press the + or , key to select the desired menu, and then press the Select key to display the selected menu. " Refer to the menu configuration on page 11 to display the desired menu. 3 To select a setting, press the +, ,, * or ) key. To enter a setting, use the keypad to type in the number. 4 Press the Select key. The setting is applied. " To cancel the settings, press the Back key. Memory Reception Received faxes can be stored in the memory and printed at a specified time. This is convenient, for example, when confidential documents are received. Memory reception can be used with the following settings. Start/end time settings: Not set MEMORY RX MODE function is normally set to ON. To print a fax saved in memory, set MEMORY RX MODE function to OFF. Start/end time settings: Set Memory reception mode begins and ends at the specified time. Example 1: When ON TIME setting is set to 18:00 and OFF TIME setting is set to 8:00 The machine is in memory reception mode from 18:00 to 8:00 and in normal reception mode, where faxes are printed after being received, from 8:00 to 18:00. Example 2: When ON TIME setting is set to 12:00 and OFF TIME setting is set to 12:00 (the start time and end time are the same) MEMORY RX MODE function is normally set to ON; however, faxes saved in memory are printed at 12:00. 34 Specifying Settings in Utility Menu