Konica Minolta bizhub C3100P bizhub C3100P Quick Start User Guide - Page 27

Initial Settings of This Machine Chapter 4 4 Preparation for network connection (for administrators) 4.1 4 Initial Settings of This Machine 4.1 Preparation for network connection (for administrators) Checking a LAN cable for connection Check that a LAN cable connected to the network is connected to the LAN port of this machine. For details on the cable connection port, refer to page 2-3. Assigning an IP address If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway address. In the Control Panel, select Menu/Select - [ADMIN SETTINGS] - [EXPERT ADJUSTMENT] - [ETHERNET] [TCP/IP] - [IPV4 SETTINGS], then configure the following settings. Settings [IP ADDRESS] [SUBNET MASK] [DEFAULT GATEWAY] [IP APPLICATION] Description When manually specifying the IP address, enter the fixed IP address assigned to the machine. When manually specifying the IP address, enter the subnet mask. When manually specifying the IP address, enter the default gateway. When automatically specifying the IP address, select the method for automatic retrieval. • [DHCP]: [ON] is specified by default. • [BOOTP]: [OFF] is specified by default. • [ARP/PING]: [OFF] is specified by default. • [AUTO IP SETTINGS]: Fixed to [ENABLE]. Tips - To check the IP address assigned to this machine, print out the Configuration Page. To print out the Configuration Page, select Menu/Select - [PRINT REPORTS] - [CONFIGURATION PG]. 4-2 [Quick Start Guide]