Konica Minolta bizhub C3110 bizhub C3110 Introduction User Guide - Page 26
Loading the original into the ADF
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
5.1 Loading the original into the ADF 5 Loading the original into the ADF The ADF feeds original sheets one by one in order from the top, and automatically loads them. It also loads a 2-sided original automatically. The ADF is helpful when loading a large number of original. 1 Put the first page of an original at the top, and load the original into the Document Feed Tray with the side to be photocopied facing upward. % Load the original so that its top side is placed at the back. When loading in a different orientation, be sure to specify the loading direction of originals. NOTICE Do not load more than 50 sheets at a time into Document Feed Tray, and do not load the sheets up to the point where the top of the stack is higher than the , mark. Doing so may cause the originals to jam, damage the originals, and/or cause ADF failure. However, if the original contains more than 50 pages, it can be scanned separately. 2 Slide the Document Guide to fit the loaded original. [Introduction] 5-3