Konica Minolta bizhub C3110 bizhub C3110 Introduction User Guide - Page 36
To con settings: [UTILITY] - [Paper Settings] - [Tray1], Loading paper into Tray 1, Tray 1
View all Konica Minolta bizhub C3110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
6.3 Loading paper into Tray 1 6 4 Load paper into the tray with the print side facing up. % For details on the available paper sizes, refer to page 6-2. % Load a postcard or reply postal card, turning the short side to the right-hand side of the tray. NOTICE Do not load the sheets up to the point where the top of the stack is higher than the , mark. If paper is curled, flatten it before loading. 5 Align the paper guide to the paper size. 6 Close Tray 1. 7 Change the paper type and paper size on the Control Panel. % To configure settings: [UTILITY] - [Paper Settings] - [Tray1] [Introduction] 6-9
[Introduction]
6-9
6.3
Loading paper into Tray 1
6
4
Load paper into the tray with the print side facing up.
%
For details on the available paper sizes, refer to page 6-2.
%
Load a postcard or reply postal card, turning the short side to the right-hand side of the tray.
NOTICE
Do not load the sheets up to the point where the top of the stack is higher than the
,
mark.
If paper is curled, flatten it before loading.
5
Align the paper guide to the paper size.
6
Close
Tray 1
.
7
Change the paper type and paper size on the
Control Panel
.
%
To configure settings: [UTILITY] - [Paper Settings] - [Tray1]