Konica Minolta bizhub C550 bizhub C550 Enlarge Display Operations User Manual - Page 66
The Half-Fold, Center Staple & Fold and Tri-Fold settings, Staple setting is selected.
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Using copy functions 2 Using copy functions Chapter 2 Setting Z-Fold*7 Description Select this setting to fold copies in half along the center, and additionally mountain-fold one of the halves before feeding them out. *1 If no finisher is installed and all of the following conditions are met, printed copies can be fed out and sorted in an alternating crisscross pattern. - 8-1/2 × 11 or 5-1/2 × 8-1/2-size (A4- or B5-size) paper is used. - Paper of the same size and type is loaded with the w orientation in one paper tray and with the v orientation in another tray. - The "Auto" Paper setting is selected. - The "Auto" Paper setting is not selected when the "Mixed Original" setting is selected. *2 If a Staple setting is selected, the "Collate (By Set)" setting is automatically selected. The "Offset" setting cannot be selected at the same time that a Staple setting is selected. *3 The Staple settings are available only if the optional finisher is installed. *4 The Punch settings are available only if the punch kit or Z folding unit is installed with the optional finisher. *5 The number of punched holes differ depending on the country (region) where the unit is installed. For details, consult your technical representative. *6 The Half-Fold, Center Staple & Fold and Tri-Fold settings are available only if optional finisher FS-608 is installed. *7 The Z-Fold setting is available only if the Z folding unit is installed with the optional finisher. C550 2-23