Konica Minolta bizhub C754 bizhub C654/C754 Web Management Tool User Guide - Page 304
Managing the machine via SNMP, Settings, Description, Read User Name]
View all Konica Minolta bizhub C754 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
14.6 Managing the machine via SNMP 14 Settings [Write Community Name] [SNMP v3 Setting] [Context Name] [Discovery User Name] [Read User Name] [Security Level] [auth-password] [priv-password] [Write User Name] [Security Level] [auth-password] [priv-password] [Encryption Algorithm] [Authentication Method] [TRAP Setting] [Allow Setting] [Trap Setting when Authentication Fails] [Administrator Information] [Device Name] [Device Location] [Administrator Name] Description Select this check box to allow read and write. Also enter a community name used for reading and writing (using up to 15 characters, excluding spaces, \, ,' ,", and #). When you use SNMP v3, configure the settings relevant to SNMP v3. Enter the context name (using up to 63 characters, excluding spaces, \, ', ", and #). Select this check box if you allow a user for detection. Enter a user name for detection (using up to 32 characters, excluding spaces, \, ', ", and #). Enter a read-only user name (using up to 32 characters, excluding spaces, \, ,' ,", and #). Select a security level for the read-only user. If [auth-password] or [auth-password/priv-password] is selected from [Security Level], enter an authentication password for the read-only user (using between 8 to 32 characters, excluding spaces and \). To enter (change) the password, select the [Password is changed.] check box, then enter a new password. If [auth-password/priv-password] is selected from [Security Level], enter a password used for privacy (encryption) of the read-only user (using between 8 and 32 characters, excluding spaces, \, ', ", and #). To enter (change) the password, select the [Password is changed.] check box, then enter a new password. Enter a user name used of the read and write user (using up to 32 characters, excluding spaces, \, ', ", and #). Select a security level of the read and write user. If [auth-password] or [auth-password/priv-password] is selected from [Security Level], enter an authentication password for the read and write user (using between 8 and 32 characters, excluding spaces, \, ', ", and #). To enter (change) the password, select the [Password is changed.] check box, then enter a new password. If [auth-password/priv-password] is selected from [Security Level], enter a password used for privacy (encryption) of the read and write user (using between 8 and 32 characters, excluding spaces, \, ', ", and #). To enter (change) the password, select the [Password is changed.] check box, then enter a new password. Select an encryption algorithm. Select an authentication method. Set TRAP function to notify of the machine status using the SNMP TRAP function. Select [Allow] to use the SNMP TRAP function. Select whether to send TRAP when authentication fails. If necessary, enter the information of this machine. Enter the name of this machine (MIB sysName) (using up to 255 characters). Enter the location where to install this machine (MIB sysLocation) (using up to 255 characters). Enter the administrator name (MIB sysContact) (using up to 255 characters). bizhub C754/C654 14-24