Konica Minolta bizhub PRESS 1250 SDD 2-Side Trimmer/Square Fold Unit User Guid - Page 5

Operator Manual STR0202 & SFM0704 DBCB-0512-0066-V005 STR0202 2-Side Trimmer & SFM0704 Square Fold Module 2. General With the addition of the 2-Side Trimmer STR0202 to the SDD product range, a cost effective full-bleed solution is available which has a small footprint and is easily to operate. This machine is designed with high reliability in mind, which means that it has been designed for long run production . The main goal of the 2-Side Trimmer, further referred to as STR, is that it can be used for trimming the bleed off the booklet. Booklets with a maximum up to 25 sheets 80g/m2 (50 folded) can be trimmed from 2mm to 35mm on each short edge of the booklet, to a minimum of 200mm and a maximum of 320mm finished size. Thereby it is also possible to trim asymmetrical. All actions concerning operating the STR and adjusting the trim settings can easily be done by using the User Interface (UI) on the STR. For example in the schedule mentioned below is schematically rendered some results which are possible with the STR by using a different Center Offset (symmetrical or asymmetrical): 3,5mm Waste 33,5mm Waste 18,5mm Waste Finished Size: 260.0mm Centre Offset: -15mm 33,5mm Waste Centre Offset: 15mm 3,5mm Waste Centre Offset: 0mm Infeed Size: 297.0mm 18,5mm Waste V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 5 -