Konica Minolta bizhub PRO 1200/1200P bizhub PRO 1051/1200/1200P Additional Inf - Page 43
chine Status Screen., The heater can be turned off manually by touching the PB switch [OFF]
View all Konica Minolta bizhub PRO 1200/1200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Using Perfect Binder PB-503 4 2 Note Once started, the warmup of the heater will not be interrupted even when the Auto Low Power/ Auto Shut Off functions on the main body. 2 Reminder Once [Perfect Bind] touched on the Output Setting Screen, the heater of the perfect binder will continue warming up even though the setting is released with [Function Off] touched on the Perfect Binding Screen or with [Reset] pressed on the control panel. If not using the perfect binder, be sure to turn off the heater by touching the PB switch [OFF] on the Machine Status Screen. To turn off the heater of the perfect binder When the job using perfect binder is completed, the heater of the perfect binder will automatically be turned off in one minute. The heater will also be turned off automatically in one minute if any operation has not been made on the perfect binder after completion of the warmup. The heater can be turned off manually by touching the PB switch [OFF] on the Machine Status Screen while warming up or ready for operation, ! Detail Service can set the heater not to be turned off automatically after oneminute interval. Please contact your service representative, if desired. In this case, the heater will not be turned off till the Auto Low Power/ Auto Shut Off functions on the main body. Please be careful not to allow the paste pellets to deteriorate. bizhub PRO 1200/1051 bizhub PRO 1200/1200P/1051 Additional Information 39