Konica Minolta bizhub PRO 1200/1200P bizhub PRO 1051/1200/1200P Additional Inf - Page 53
Touch [Output Setting], then touch [Perfect Bind]., The Perfect Binding Screen will be displayed
View all Konica Minolta bizhub PRO 1200/1200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Using Perfect Binder PB-503 4 3 Touch [COPY] tab to display the Copy Screen, select the tray loaded with paper for body sets, and change the paper setting as required. - The paper size will be detected automatically. If paper weight specified for the tray loaded with paper for body sets is inadequate, the binding operation cannot be performed. Select either [17-19 lb Bond] or [20-24 lb Bond]. - The binding operation may not be performed even if the paper weight mentioned above is specified. For details, see POD Administrator's reference. The number of body set may be limited depending on the selected paper weight. For details, see POD Administrator's reference. 4 Touch [Output Setting], then touch [Perfect Bind]. The Perfect Binding Screen will be displayed, and the heater of the perfect binder automatically starts warming up. The warmup takes approximately 20 minutes. If you previously know the time to use the perfect binder, calculate the timing to turn on the heater with required warmup time, then manually turn it on by touching [ON] of PB switch on the Machine Status Screen. bizhub PRO 1200/1200P/1051 Additional Information 49