Konica Minolta bizhub PRO 950 bizhub PRO 950 Printer User Guide - Page 287

Utility Tool 13 13.2 NetWare This printing system works with IPX/SPX (Internetwork Packet Exchange / Sequenced Packet Exchange). This section explains how to configure a NetWare File Server, a NetWare Print Server, and a NetWare queue. The image controller supports the system environment described below. NetWare Version NetWare 3.2 NetWare 4.x NetWare 5.x NetWare 6 Protocol IPX IPX IPX TCP/IP Emulation Bindery NDS NDS Service Mode Pserver/Rprinter Pserver/Nprinter Pserver NDPS(lpr) Setup for NetWare 3.x Before setting up NetWare, you have to define the print server name, etc., from the Web Utilities. The setup procedure of NetWare 3.x is as follows. To perform this procedure, you need authorization to perform this procedure. 1 Start up PCONSOLE and select the file server to use. - Refer to the manual of Novell NetWare for setting up with PCONSOLE. 2 Generate and assign a print queue. 3 Define the network interface card as the print server. 4 Define the notification list/password as necessary. 5 Set up the primary file server as necessary. On completion of setup, turn off the main power of the image controller and the main body printer and turn it on again. The main body printer will print out a Status Page indicating the file servers equipped with print server and the queues that the file servers will service. bizhub PRO 950 13-20