Kyocera Ai6060 PCU-1 Instruction HB

Kyocera Ai6060 Manual

Get Kyocera Ai6060 PDF manuals and user guides View all Kyocera Ai6060 manuals
Add to My Manuals
Save this manual to your list of manuals

Kyocera Ai6060 manual content summary:

  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 1
    PCU-1 PRINT CONTROLLER INSTRUCTION HANDBOOK ALWAYS read this Instruction Handbook thoroughly before use. After reading, maintain it in good condition and keep it together with the Instruction Handbook for your copier.
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 2
    Acknowledgments All brands and product names are trademarks or registered trademarks of their respective companies. PostScript ® A registered trademark of Adobe Systems, Inc. Agfa Intellifont® Scalable Typefaces A registered trademark from Agfa Corporation TrueType ™ A trademark of Apple Computer,
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 3
    , enabling you to print directly from your workstation. Use this equipment according to instructions in this handbook. Other product related manuals are provided under separate cover. For example, the printer engine comes with a separate Instruction Handbook that should be kept with the main body
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 4
    , and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the instruction manual, interference with radio communications may result. This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Subpart
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 5
    of Terms The terminology used in this handbook is commonly used in the printing industry. For convenience, some of the terms are defined below. CIC - Copier Interface Card The hardware component inside the PCU-1 controller (communication via PCI Bus) that interfaces with the printer engine. Also
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 6
    Introduction ...1-2 System Configuration 1-3 Settings ...1-3 Media Support 1-4 Layout ...1-5 I/O Interfaces 1-6 Memory Configuration 1-7 Specifications 1-8 Section 2: Printer Drivers Installing Printer Drivers 2-2 Checking Printer Driver Version 2-4 About Printer Driver Screens 2-5 Vi 550(Ai
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 7
    Section 1: The Print Controller Introduction System Configuration Settings Media Support Layout I/O Interfaces Memory Configuration Specifications
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 8
    the PCU-1 Print Controller. The PCU-1 Print Controller interfaces with your printer, enabling you to print directly from your PC or network. The PCU-1 supports PCL 5E and PostScript Level 1 & 2 compliant files and automatically uses the correct language for each print job, provided the print job
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 9
    floppy disk VGA Video Card A keyboard or monitor may be used for diagnostic functions of the PCU-1. The Copier Interface Card (CIC) of the PCU-1 acts as a Settings Default Paper Size Default Resolution Default Emulation Default Printer Quality Serial Port Parameters Other Settings E-RDH Print Order
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 10
    Media Support The Print Controller supports the following paper types through the main body printer. An and thin paper can only be used through the manual bypass tray. After selecting the manual bypass tray, you will be Service representative if you wish to activate the Wait Mode. The Print Controller
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 11
    Port to PC CN1/CN2 Monitor Port IMPORTANT: 1. Before connecting cables to the PCU-1, be sure to turn the power Off. 2. If the Printer connection is not being used, be sure the port is covered by a plastic cap. Plastic caps are provided to cover the Serial Port, Parallel Port, and lower Monitor
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 12
    Server PC or Print Server V Network > Interface Card NC-3 V Parallel Port V Serial Port Input Buffer PCL 5E Interpreter PostScript Interpreter PCU-1 Memory V Controller Interface to Printer The Print Controller 1-6
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 13
    400 DPI 1,870 Kbytes 14.96 Mbytes 600 DPI 4,207 Kbytes 33.66 Mbytes 32 MBytes installed=15 pages @1-Bit, 400 DPI NOTE: ~2.7 MB is used for the system. You may select various image quality modes from your print driver screen to produce various levels of grayscale. The following Table shows
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 14
    Specifications System Architecture Processor Memory Hard Drive Floppy Drive Input/Output Interfaces Serial Connector Baud Rates Parallel Network Connectivity PDL Support Standard Optional IBM Compatible PC System 200 MHz Intel Pentium MMX 16 MB standard/128 MB max. IDE compatible 3.5" Floppy
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 15
    Section 2: Printer Drivers Installing Printer Drivers Checking Printer Driver Version About Printer Driver Screens Vi 550(Ai 5555) Print Mode LCD Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 PCL Driver for Windows 95 PostScript Driver for Windows 95 Printing Modes Tray
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 16
    the Control Panel icon. 3. In the control Panel window, choose the Printers icon. 4. Choose the Add button. 5. In the List Of Printers box, select Install Unlisted or Updated Printer. Depending upon the printer driver version, you may need to use the Browse button to find and select the driver. Then
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 17
    be assigned (LPT1, LPT2, LPT3) without having to add more through the WIN.INI file. Should it be necessary to add more than three printers, click on the Help button in the Connect box for instructions. Tip: If you print to LPT1 in Windows 3.x and LPT1 is redirected to another port, the
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 18
    times when you need to know if you are using the most up-to-date printer driver. The procedure shown below for Windows 3.x is similar for all printer drivers. Check the Printer Driver Version for Windows 3.x 1. Highlight the driver in the Printers dialog box. 2. Click on the Setup button. 3. Click
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 19
    is shown at the bottom of this page. To view the specific printer driver screens you will encounter when using the PostScript printer driver for Windows 3.1, PCL printer driver for Windows 95, or PostScript printer driver for Windows 95, see p. 2-19. NOTES: 1. Windows 3.1 screens are similar to
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 20
    LCD Paper Loading Check Mode/Print Start Message Printer Mode Icons Check Mode Using the Check Mode Using the PROOF PRINT Option When Settings are Not OK Stop/Clear Mode Interrupt/Reserve Mode When Printiing is in Progress Job Status Display Copier/Printer Copier Controller Mode 2-6 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 21
    and enable you to make selections and changes, as needed. NOTE: The basic screen for the Copier Mode is described in a separate Instruction Handbook. Screen Configuration The Basic Screen of the Printer Mode consists of a Message area, an icon area, a Folder area and a Mode area, similar to the
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 22
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Paper Loading If the setting of your , the following message will display on the screen to give you the option of using the Check Mode before printing. If you do not wish to use the Check Mode, you may press the START key and print right away. The
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 23
    is in the initialization mode. PRINT: The Printer controller is currently printing. ERROR: The Printer Controller generated an error message. READY: The Printer Controller is ready for printing. IDLE: The Printer Controller is waiting for a print job. Using the Check Mode As mentioned on the
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 24
    Drivers Vi 550(Ai 5555) Print Mode LCD Using the Check Mode Selecting Check Mode 1. Press the Check key while the Check Mode/Print Screen message is displayed. (See sample screen on previous page.) 2. When the PRINTER CHECK MODE screen is displayed, view the list of current print mode
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 25
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Stop/Clear Mode The Stop/Clear key can be pressed to cancel a print job The following YES/NO confirmation screen will be displayed. Press YES to confirm the cancelation. Press NO to continue printing without canceling the job. Printer Drivers 2-11
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 26
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Interrupt/Reserve Mode The Interrupt mode can be used to interrupt the current printing operation to perform a copying job. The Interrupt mode can , press the Interrupt key again to enable the engine to resume the print mode. 2-12 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 27
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD When printing is in progress: 1. Press the Interrupt key when printing is in process. a copying job that will be performed after the print job in progress is completed. The engine will automatically resume the print mode. Printer Drivers 2-13
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 28
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Job Status Display The STATUS folder appears on the basic screen in realtime. When the STATUS folder is pressed, the JOB STATUS DISPLAYscreen displays. The display is different for a COPIER/PRINTER job and a COPIER job, as shown on the next pages. 2-14
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 29
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Job Status Display (continued) COPIER/PRINTER PRINTER CONT ROLLER NOTE: The above screen shows that scanning is in progress via the controller for the Printer job. Printer Drivers 2-15
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 30
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Job Status Display (continued) The screen below shows the JOB STATUS DISPLAY for a copier job. COPIER NOTE: The above screen shows that scanning is in progress via the controller for the Reserve Copier job. 2-16 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 31
    Printer Drivers Vi 550(Ai 5555) Print Mode LCD Controller Mode The Controller Mode screen information is specified by the controller (see Print to enter the Controller mode. To release the Controller Mode 2. Press the MODE button again to escape from the Controller mode. Printer Drivers 2-17
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 32
    Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 PCL Driver for Windows 95 PostScript Driver for Windows 95 2-18 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 33
    to select a specific tray (see screen below) • Click on Options to make other selections Paper Source Mita Vi550 (Ai5555) PCL The default for Paper Source is AutoSelect which means that the printer will select an appropriate tray for the paper size indicated. If you select a specific tray, the
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 34
    style of your print job, as follows: • Offset each set when making multiple sets • Staple each output set • Use Print Quality with High Resolution for graphic images • Use Special modes of 2-in-1, 4-in-1, Booklet • Use Insert tray to insert special paper in the manual tray 2-20 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 35
    Advanced Options Screen The Advanced Options screen allows you to select: • Fonts To change the default font currently in use, click the arrow in the Send to Printer field to display the options. • Memory Increase the amount of memory allocated for storing pages. • Graphics Change resolution to
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 36
    Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Offset Mode When printing multiple sets, use the Offset mode to separate one printed set from another. Click Offset to display the current On/Off setting. Click on the desired option and click on OK. 2-22 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 37
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Staple Mode When printing multiple sets, use the Staple mode to staple each set. Click on Staple to display Staple mode places two staples along the left edge of a portrait or landscape document. Printer Drivers 2-23
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 38
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Print Quality Use the Print Quality mode when your image includes graphics or halftones requiring a resolution that is higher than the Text mode. Click on Print Quality to
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 39
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Print Density Print Density allows you mode or click on the arrow to view further options. • Toner Saver mode uses 80% of the toner normally used. • Draft mode uses 60% of the toner normally used. Printer Drivers 2-25
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 40
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Edge Smoothing Click on Edge Smoothing to display the current setting. • Edge Smoothing Edge Smoothing enhances the images of text or objects by filling in the feathered edges with extra toner. 2-26 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 41
    means you will not be prompted to load special paper. If your printer is also set for "fixed-tray/paper configuration," printing will be On, the system will prompt you to insert the selected paper. Use this setting when your printer is set for "flexible tray/ paper configuration" or when you
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 42
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Special Modes Click on Special Modes to display the current setting in the page locations you designate by page number. NOTE: Page numbers should reflect the sequential pages of your document. 2-28 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 43
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Special Modes ( will insert these sheets as the first and last pages of your document. • Select Chapterization when using duplex or booklet mode The system will insert blank pages at the end of each chapter, as
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 44
    3.1 Insert Tray Click on Insert Tray to display the current tray setting. When Manual tray is selected, the system will prompt you to load paper in the manual tray. If you change the tray setting to Tray 1, for example, the system will only use that tray for the print job. 2-30 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 45
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Paper Type Select Paper Type to display the current setting. The default setting is Plain Paper. Select the special type paper you want to insert in the manual tray, such as, OHP transparency, thin paper, or thick
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 46
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Output Bin Click on Output Bin to display the current setting for the output change the setting, click another option for the output tray. Or, click the arrow to view further setting options. 2-32 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 47
    Drivers Vi 550(Ai 5555) Printer Driver Screens PostScript Driver for Windows 3.1 Output Order Click on Output Order to display the current setting. The default for your document is not required. Select Face Down mode when the sequential order for your document is required. Printer Drivers 2-33
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 48
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Mita Vi550 (Ai5555) PCL General Screen Mita Vi550 (Ai5555) PCL The General Screen displays tabs for all available properties selection, click the Cancel button at the bottom of the screen. 2-34 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 49
    Details Screen - Printer Port Mita Vi550 (Ai5555) PCL Mita Vi550 (Ai5555) PCL Click the Details tab to display the current printer port setting. Click the arrow for options, then select the port you want. This screen also allows you to change the current time interval used for capturing files
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 50
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Mita Vi550 (Ai5555) PCL Setup Screen - Paper Size Click the Setup tab to display the current to Landscape orientation, which places the readable printed image widthwise rather than lengthwise. 2-36 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 51
    Driver Screens PCL Driver Screens for Windows 95 Mita Vi550 (Ai5555) PCL Setup Screen - Paper Tray Click on the Setup tab. The current setting for paper tray is AutoSelect, which enables the printer to automatically select the appropriate paper. If you want to specify an output tray, click
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 52
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Setup Screen - Resolution Mita Vi550 (Ai5555) PCL Click on the Setup tab. The current Resolution setting is 400 dpi. To change the current setting, click on the arrow to
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 53
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Watermarks Screen - General Mita Vi550 (Ai5555) PCL Click on the Watermarks tab. The default setting is None. automatically display to allow you to select the details, as shown on the next page. Printer Drivers 2-39
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 54
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Watermarks Screen - Edit (continued) The Edit screen allows you to enter text, font next to Angle to scroll to the desired angle setting. When all the settings are displayed correctly, click OK. 2-40 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 55
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Fonts Screen - General Mita Vi550 (Ai5555) PCL Click on the Fonts tab to display the current font settings. If you need to edit the Font Substitution Table, click on
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 56
    specify the host fonts that you want to be replaced with built-in printer fonts. Printing is faster with built-in printer fonts. In this screen, the Arial font is downloaded. Use the arrow to scroll to the available options. Use the arrows to scroll through the font list to see how they are
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 57
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Device Options - Installable Options Mita Vi550 (Ai5555) PCL F8220 F8220 Click on the Device Options tab to display the Installable Options screen. This screen displays the currently installed finishing device
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 58
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Mita Vi550 (Ai5555) PCL Finishing - Stapling/Job Offset Click on the Finishing tab to view the default settings will resume. NOTE: Default settings can be changed from the Windows Printer screen. 2-44 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 59
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Media Settings - Print Density Mita Vi550 (Ai5555) PCL Click the Media Settings tab to view current settings. The default setting for Print Density is Normal. For any given job, you
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 60
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Mita Vi550 (Ai5555) PCL Media Settings - Media Type Click the Media Settings tab to view the crent settings, the default setting for Plain Paper will resume when the print job is completed. 2-46 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 61
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Job Settings - Special Modes Mita Vi550 (Ai5555) PCL Click the Job Settings tab to display the current settings. at designated locations. Double click on the setting mode you want, then click OK. Printer Drivers 2-47
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 62
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Screens for Windows 95 Mita Vi550 (Ai5555) PCL Job Settings - Duplex Mode Click on the Job Settings tab to display the current Edge Binding for portrait orientation. Double click on the setting(s) you want, then click OK. 2-48 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 63
    Drivers Vi 550(Ai 5555) Printer Driver Screens PCL Driver Screens for Windows 95 Mita Vi550 (Ai5555) PCL Job Settings - Wait Mode Click the Job Settings tab to display the current set before printing multiple sets. Double click on the setting mode you want, then click OK. Printer Drivers 2-49
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 64
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Mita Vi550 (Ai5555) PS General Screen OK. The system will search for the topic and guide you further. Click on the arrow to display further default settings associated with the general printing
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 65
    Mita Vi550 (Ai5555) PS Device Options - Print Quality Finisher Installed F8220 F8220 The Device Options tab displays several setting options along with the available printer is identified in the Installable options field. Use the arrow in the lower field to display other installed devices, such as,
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 66
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Edge Smoothing Finisher Installed F8220 F8220 Click on the Device fills in the feathered edges with extra toner to make a crisp printing result. 2-52 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 67
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Draft mode, etc. Toner Save mode uses 80% of the amount of toner used in Normal mode. Draft mode uses 60% of the amount of toner used in Normal mode. Printer Drivers 2-53
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 68
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Job Offset Finisher Installed F8220 F8220 Click on the Device delivers multiple printed sets to the finisher with each set offset from the other. 2-54 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 69
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Wait Mode Finisher Installed F8220 F8220 Click on the with Proof means that you will be prompted to print a proof set before printing multiple sets. Printer Drivers 2-55
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 70
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Special Modes F8220 Click on the Device Options tab to view for Letterhead. If the Letterhead tray is empty, you will be prompted to insert paper. 2-56 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 71
    Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Insert Tray Finisher Installed F8220 F8220 Click on the Device the desired paper must be installed in that tray; otherwise, the job will not be printed. Printer Drivers 2-57
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 72
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Device Options - Output Order Finisher Installed F8220 delivers your printed job face down in sequential order. Use this mode when the proper order of the printed set is required. 2-58
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 73
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Paper Setting - Paper Size Click on the Paper tab. The default for Paper Size is Letter size. Click on another paper size,
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 74
    Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Paper Setting - Paper Source Click on the Paper tab. The default for Paper Source is 5, the job will not be performed until the correct paper size is installed in that tray. 2-60 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 75
    Printer Driver Screens PostScript Driver Screens for Windows 95 Paper Setting - More Paper Options Click on the Paper tab. Click on More Options to view setting options and make changes as needed. • The default for duplex printing is None. • Use bin is the Lower Bin. Use the arrow to view further
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 76
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Graphic Screen - Resolution Click on the Graphics tab. The default for Resolution is 400 dpi. Click on the arrow to view setting
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 77
    Drivers Vi550(Ai5555) Printer Driver Screens PostScript Driver Screens for Windows 95 Mita Vi550 (Ai5555) PS Graphic Screen - Halftoning Click on the Graphics tab. The default for Halftoning uses 400 dpi mode for text. The Very High mode will give you a true halftone result. Printer Drivers 2-63
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 78
    Printer Drivers Printing Modes Output Quality Output Quality options are only available with 600 dpi selected. In this mode, each bit is produced from one of 16 grayscale levels. Use High Mode for photos and graphic images that require high resolution. • Medium Mode Medium Mode provides 4-level
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 79
    unlimited 2-sided prints. Mode Restriction: Duplex Mode cannot be used together with the manual Feed Tray or Very High Mode. Offset Stacker/Stapler Restriction: Job Offset or Stapling cannot be used with the Manual Feed Tray. NOTE: When switching resolution, a few seconds
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 80
    Printer Drivers Printing Modes The PCU-1 controller supports use either 1-1 or 1-2 mode with the Booklet mode. Mode Restriction: Booklet mode cannot be used together with Sheet Insertion or the Manual means for your printer to handle two different jobs simultaneously, even for a copier job and a
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 81
    % toner usage 80% toner usage 60% toner usage Wait Mode The Wait Mode is available from your printer driver screen. • Wait Mode Off Use Wait Mode Off to save time when your printer has a "fixed tray/paper configuration" by allowing printing to take place without further prompting. • Wait Mode On
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 82
    Printer Drivers Tray Selection/Paper Selection The system selects paper size and paper tray according to the manner and conditions specified below. • When a paper size is not specified for a print job, the default paper size is used the appropriate paper size in the Manual tray or Tray 1 and continue
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 83
    match the certain font characteristics, e.g., spacing, pitch, point size. Printer commands for PCL 5 are included in Section 4. NOTES: 1. A Japanese market version of the PCU-1 is provided with Kanji font support, and will use the Pipeline PowerPage 2J PostScript interpreter and Kanji type 0/4 fonts
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 84
    available alphanumeric, punctuation, and special symbols in a font. More than one Symbol Set can be used by one font, e.g., a math symbol set, legal symbol set, or Roman-8 symbol set. , italics), width (condensed, normal, expanded), and structure (outline, solid, shadow). 2-70 Printer Drivers
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 85
    Drivers PostScript Printer Language Fonts The following fonts are the visual equivalent of Adobe font names. AvantGarde-Book AvantGarde-BookOblique ABCDEFGHIJ1234567890 ABCDEFGHIJ1234567890 ABCDEFGHIJ1234567890 ABCDEFGHIJ1234567890 ABCDEFGHIJ1234567890 )01234567 !"#$%i Printer Drivers 2-71
  • Kyocera Ai6060 | PCU-1 Instruction HB - Page 86
    Printer Drivers PCL Printer Language Fonts The interpreter for the PCL language intertpretes the following fonts for a PCL print job. 2-72 Printer Drivers
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
PCU-1
PRINT CONTROLLER
ALWAYS read this Instruction Handbook thoroughly before
use. After reading, maintain it in good condition and keep it
together with the Instruction Handbook for your copier.
INSTRUCTION HANDBOOK