Kyocera FS 1920 FS-1920 Operation Guide Rev 1.2 - Page 156
Table 4-4, Continued, Correcting a Paper Jam, Toner Container Replacement, Toner Container
View all Kyocera FS 1920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Indicators and Messages Message Load Cassette # (paper size)/(paper type)†† Corrective Action There is data for printing that matches with a paper cassette setting (paper size, paper type), but there is no paper in the paper cassette. Set paper into the paper source as displayed on the operator panel, and press the GO key to restart printing. However, the paper source number (#) is only displayed when there is an option paper feeder installed. Or, if you want to print from a different paper source press the and key to display Use alternative? and you can change the source for paper feeding. After selecting a paper source and pressing the MENU key, Paper Handling > appears. By pressing the > key, the paper type settings menu appears. After setting ;Òthe correct paper type, press the ENTER key and printing starts. Load MP tray (paper size)/(paper type)†† There is no paper cassette set (paper size, paper type) that matches with the data for printing, so printing is done from the MP tray. Set paper into the MP tray that matches the paper size and type shown on the display and press the GO key to restart printing. Or, if you want to print from a different paper source press the and key to display Use alternative? and you can change the source for paper feeding. Missing duplex drawer Option interface Error Paper jam After selecting a paper source and pressing the MENU key, Paper Handling > appears. By pressing the > key, the paper type settings menu appears. After setting ;Òthe correct paper type, press the ENTER key and printing starts. The duplex drawer is either not installed or incorrectly inserted. Insert the duplex drawer securely. A failure has occurred with the option network interface card. Check the option interface installed in the printer. Open the top cover or the paper transfer unit and correct the paper jam (or paper misfeeding in the paper cassette). The location of the paper jam is also indicated in place of the #'s. Online help messages which are useful for correcting the paper jam will be ;Òdisplayed by pressing the ? key. (See Correcting a Paper Jam on page 4-12) Remove paper sorter tray ## There is still paper in the option sorter's tray indicated by # when the power was turned on or the sorter's mode was switched. Remove all the paper inside the sorter. ;Ò Replace toner Clean printer Replace the toner container using a new toner kit. The printer does not operate when this message is displayed. See Toner Container Replacement on page 3-2. ;Ò Set paper Press GO The MP tray is out of paper. Load paper and press the GO key. (Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam.) Sorter tray ## paper full The sorter tray indicated by # is now full. Remove some of the paper from the sorter tray concerned. ;Ò Toner low Replace the toner container using a new toner kit. See Toner Container Replacement on page 3-2. Top tray The top tray has become full (approx. 250 pages). You must remove all printed pages paper full from the top tray. When the printer senses that the top tray is empty again, it will ;Òcontinues printing into the top tray. ;Ò:Alarm buzzer sounds when an error occurs. Press the CANCEL key to stop the alarm buzzer. Table 4-4 (Continued) 4-8