Kyocera FS 1920 FS-1920 Operation Guide Rev 1.2 - Page 209
USB Interface, Specifications, Interface Signals
View all Kyocera FS 1920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
USB Interface USB Interface This printer supports the Full-Speed 2.0 USB. USB (Universal Serial Bus) interface specifications and interface signals are as follows. Specifications Basic specification Complies with the Full-Speed USB 2.0. Connectors Printer: B-type receptacle (female) with upstream port Cable: B-type plug (male) Cable Use shielded cable that complies with the USB Revision 1.1 standards and not longer than 5 meters (16 feet). Transfer Mode Full speed (max. 12 Mbps) Power Control Self-power device Interface Signals Pin 1 2 3 4 Shell Table B-3 Signal Vbus DD+ GND - Description Power supply (+5 V) Data transmission Data transmission Signal ground Shield B-5
USB Interface
B-5
USB Interface
This printer supports the Full-Speed 2.0 USB. USB (Universal Serial Bus)
interface specifications and interface signals are as follows.
Specifications
Basic specification
Complies with the Full-Speed USB 2.0.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use shielded cable that complies with the USB Revision 1.1 standards and
not longer than 5 meters (16 feet).
Transfer Mode
Full speed (max. 12 Mbps)
Power Control
Self-power device
Interface Signals
Pin
Signal
Description
1
Vbus
Power supply (+5 V)
2
D-
Data transmission
3
D+
Data transmission
4
GND
Signal ground
Shell
—
Shield
Table B-3