Kyocera TASKalfa 300ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 348
Starting/Exiting Application Use, Default Setting System Menu, OPERATION GUIDE, Removable Memory can
View all Kyocera TASKalfa 300ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
Default Setting (System Menu) 6 When the confirmation screen appears, press [Yes]. Installation of the application begins. Depending on the application being installed, the installation may take some time. Once the installation ends, the original screen reappears. 7 To install another application, repeat steps 5 to 6. 8 To remove the USB memory, press [Remove Memory] and wait until the Removable Memory can be safely removed message appears. Then remove the USB memory. Starting/Exiting Application Use To use an application, set the application to License On. Use the procedure below to start using an application. 1 Press the System Menu key. 2 Press [ ] and then [Application]. NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to Adding a User on page 11-4 for the default login user name and password. Application Manage the applications. PanelPlus Name Application 1 Print Report Status Version Status License J00_E100... Activating Official J00_E200... Activating Trial Detail Add Delete 1/1 License On License Off Close 05/05/2009 10:10 3 Select the desired application and press [License On]. You can view detailed information on the selected application by pressing [Detail]. NOTE: To exit an application, press [License Off]. 8-84 OPERATION GUIDE