Kyocera TASKalfa 500ci DF-760/MT-720/BF-720/PH-5A Operation Guide - Page 21
Emptying the Punch Waste Box, scraps when removing the container.
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English Emptying the Punch Waste Box If a message is displayed on the machine operation panel indicating that the waste punch box is full, be sure to empty the scraps in the punch waste box. Leave the main power switch on the machine switched ON ( | ) while performing this procedure. 1 Open the front cover. 2 Grasp the punch waste box handle and remove the box from the Document Finisher. NOTE: Take care not to spill the waste hole punch scraps when removing the container. 3 Dispose of the hole punch scraps appropriately. 4 Re-install the punch waste box. Align it with the guides in the Document Finisher. 5 Close the front cover. DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 19
English
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
19
Emptying the Punch Waste Box
If a message is displayed on the machine operation panel indicating that the waste punch box is full, be sure to
empty the scraps in the punch waste box.
Leave the main power switch on the machine switched ON ( | ) while performing this procedure.
1
Open the front cover.
2
Grasp the punch waste box handle and remove
the box from the Document Finisher.
NOTE:
Take care not to spill the waste hole punch
scraps when removing the container.
3
Dispose of the hole punch scraps appropriately.
4
Re-install the punch waste box. Align it with the
guides in the Document Finisher.
5
Close the front cover.