Kyocera TASKalfa 500ci DF-760/MT-720/BF-720/PH-5A Operation Guide - Page 29
Center-Folding Unit option, Conveyor
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Center-Folding Unit (option) Conveyor Section English If the illustration shown displays on the machine's operation panel, there is a paper jam in the conveyor section of the Center-Folding Unit. 1 While pushing the finisher release lever, pull the finisher out from the machine. 2 Open the right cover (D8) and remove the jammed paper. If there is no paper jam in the right cover (D8), proceed to the following step. 3 Close the right cover (D8) and re-install the finisher back into position on the machine. 4 Open the front cover. 5 Pull out the inner tray (D5). DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 27
English
DF-760, MT-720, BF-720, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
27
Center-Folding Unit (option)
Conveyor Section
If the illustration shown displays on the machine’s
operation panel, there is a paper jam in the conveyor
section of the Center-Folding Unit.
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8) and remove the jammed
paper.
If there is no paper jam in the right cover (D8),
proceed to the following step.
3
Close the right cover (D8) and re-install the finisher
back into position on the machine.
4
Open the front cover.
5
Pull out the inner tray (D5).