Kyocera TASKalfa 6501i Fax System (W) Operation Guide Rev-2.2013.1 - Page 192
i-FAX Default Settings
View all Kyocera TASKalfa 6501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Internet Faxing (i-FAX) > i-FAX Settings i-FAX Default Settings Function Settings > FAX / i-FAX Use this page to enable the internet faxing. The settings available on the page are shown below. Item Common Settings Transmission Local FAX Name TTI TTI Position Dept. Name Usage Reception Retry Times Media Type Use MP Tray Reduced RX Size FAX Settings i-FAX Settings TX/RX SMTP Receive Date/Time Duplex Printing 2in1 Printing i-FAX Protocol† SMTP Server Name†† SMTP Port Number SMTP Server Timeout Authentication Protocol † When Direct SMTP is used, this must always be set. †† When Internet FAX is used, this must always be set. Description Enter the local fax name. Selects On or Off whether to send the TTI (Transmit Terminal Identifier) information to the other party. Selects the position of the TTI to be printed on the transmitted documents. Set to On to use the account name as the local FAX name. The account name appears in place of the local FAX name. Specify the number of redials from 0 to 14 times. Sets the media type for printing the received documents. Selects whether or not to include the MP (multi purpose) tray for auto media selection when printing received documents. When turned [On], the MP tray will be included as an option for auto media selection, and when turned [Off], only the cassettes will be selected. Specifies the printing configuration for printing a document, which is larger than the selected paper size. When [Same Size Override] is selected, the document will be printed on multiple sheets of paper without reducing the text. When [Reduction Override] is selected, the document will be printed on one sheet whenever possible. Selects [On] or [Off] whether to print the reception information such as the received date, the received time, the transmitting party's information and the number of transmitted pages on the top of the received documents. Specifies whether or not to use the Duplex mode. Enables or disables 2 in1 reception. Configure settings for FAX. For details, refer to the Command Center RX User Guide. Display whether an i-FAX connection is available or not. Configure i-FAX in [i-FAX (SMTP & POP3)] on the Protocol Settings page. Enter the SMTP server name or SMTP server IP address. You can enter up to 64 characters. If you enter the server name, you must specify the IP address of the DNS server. You can enter the DNS server IP address in the TCP/IP settings screen. Refer to the machine's Operation Guide for details. Set the port number used by SMTP. Normally, 25 is used. Enter the timeout period in seconds. Specify whether SMTP authentication will be used or whether [POP before SMTP] will be used. This SMTP authentication is compatible with Microsoft Exchange 2000. 8-6