LG 22XE1J User Guide - Page 107

LED Local Dimming] Command: s n, c6, HDR Picture Mode] Command: s n, c4

Get LG 22XE1J PDF manuals and user guides View all LG 22XE1J manuals
Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

107 ENGLISH 102. Read Brightness Value (Command: m u) Checks the brightness value. Transmission (m)(u)( )(Set ID)( )(FF)(Cr) Acknowledgment (u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3)(Data4) (Data5)(Data6)(Data7)(x) Data 1 00~64: Backlight PWM figure 0-100 Data 2 00~ff: The upper 1-byte of the value measured by the CA210. Data 3 00~ff: The lower 1-byte of the value measured by the CA210. The CA210 measurement is Hex: 0000~ffff, Decimal: 0 - 65535 Data 4 00~ff: The upper 1-byte of the value measured by BLU 1 Sensor. Data 5 00~ff: The lower 1-byte of the value measured by BLU 1 Sensor Data 6 00~ff: The upper 1-byte of the value measured by BLU 2 Sensor Data 7 00~ff: The lower 1-byte of the value measured by BLU 2 Sensor The BLU measurement is Hex: 0000~ffff, Decimal: 0 65535 * The CA210 measurement is entered as "Calibration" when the product is released from the factory. It is Default 0 before the calibration. * This feature may not be available for all models. 103. [Screen Fault Detection] (Command: t z) Sets the Screen Fault Detection feature. Transmission (t)(z)( )(Set ID)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (z)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 104. [Stereo Mode] (Command: s n, c2) Controls Stereo Mode. Transmission (s)(n)( )(Set ID)( )(c)(2)( )(Data)(Cr) Data 00: Left/Right 01: Left/Left 02: Right/Right Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(2)(Data)(x) * This feature may not be available for all models. 105. [HDR Picture Mode] (Command: s n, c4) Selects a HDR Picture Mode. Transmission (s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr) Data 00: Mall/QSR 01: General 02: Gov./Corp. 04: Education Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(4)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 106. [Dynamic Tone Mapping] (Command: s n, c5) Selects Dynamic Tone Mapping. Transmission (s)(n)( )(Set ID)( )(c)(5)( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(5)(Data)(x) * Depending on the model, some picture modes may not be supported. * It works only when the HDR content is running. 107. [LED Local Dimming] (Command: s n, c6) Sets the LED Local Dimming. (A feature to set the LED Local Dimming in a sub-item under [Settings] [Display] [Picture Mode] [Picture Options]) Transmission (s)(n)( )(Set ID)( )(c)(6)( )(Data)(Cr) Data 00: [Off] 01: [low] 02: [Medium] 03: [High] Acknowledgment (n)( )(Set ID)( )(OK/NG)(c)(6)(Data)(x) * This feature may not be available for all models.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
ENGLISH
107
102. Read Brightness Value (Command: m u)
Checks the brightness value.
Transmission
(m)(u)( )(Set ID)( )(FF)(Cr)
Acknowledgment
(u)()(SetID)()(OK/NG)(Data1)(Data2)(Data3)(Data4)
(Data5)(Data6)(Data7)(x)
Data 1 00~64: Backlight PWM figure 0-100
Data 2 00~ff: The upper 1-byte of the value measured by
the CA210.
Data 3 00~ff: The lower 1-byte of the value measured by
the CA210.
The CA210 measurement is Hex: 0000~ffff, Decimal:
0 - 65535
Data 4 00~ff: The upper 1-byte of the value measured by
BLU 1 Sensor.
Data 5 00~ff: The lower 1-byte of the value measured by
BLU 1 Sensor
Data 6 00~ff: The upper 1-byte of the value measured by
BLU 2 Sensor
Data 7 00~ff: The lower 1-byte of the value measured by
BLU 2 Sensor
The BLU measurement is Hex: 0000~ffff, Decimal: 0 -
65535
* The CA210 measurement is entered as “Calibration” when
the product is released from the factory. It is Default 0 before
the calibration.
* This feature may not be available for all models.
103. [Screen Fault Detection] (Command: t z)
Sets the Screen Fault Detection feature.
Transmission
(t)(z)( )(Set ID)( )(Data)(Cr)
Data
00: [Off]
01: [On]
Acknowledgment
(z)( )(Set ID)( )(OK/NG)(Data)(x)
* This feature may not be available for all models.
104. [Stereo Mode] (Command: s n, c2)
Controls Stereo Mode.
Transmission
(s)(n)( )(Set ID)( )(c)(2)( )(Data)(Cr)
Data
00: Left/Right
01: Left/Left
02: Right/Right
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(c)(2)(Data)(x)
* This feature may not be available for all models.
105. [HDR Picture Mode] (Command: s n, c4)
Selects a HDR Picture Mode.
Transmission
(s)(n)( )(Set ID)( )(c)(4)( )(Data)(Cr)
Data
00: Mall/QSR
01: General
02: Gov./Corp.
04: Education
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(c)(4)(Data)(x)
* Depending on the model, some picture modes may not be
supported.
* It works only when the HDR content is running.
106. [Dynamic Tone Mapping] (Command: s n, c5)
Selects Dynamic Tone Mapping.
Transmission
(s)(n)( )(Set ID)( )(c)(5)( )(Data)(Cr)
Data
00: [Off]
01: [On]
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(c)(5)(Data)(x)
* Depending on the model, some picture modes may not be
supported.
* It works only when the HDR content is running.
107. [LED Local Dimming] (Command: s n, c6)
Sets the LED Local Dimming.
(A feature to set the LED Local Dimming in a sub-item under
[Settings]
[Display]
[Picture Mode]
[Picture Options])
Transmission
(s)(n)( )(Set ID)( )(c)(6)( )(Data)(Cr)
Data
00: [Off]
01: [low]
02: [Medium]
03: [High]
Acknowledgment
(n)( )(Set ID)( )(OK/NG)(c)(6)(Data)(x)
* This feature may not be available for all models.