LG 22XE1J User Guide - Page 93
Remote Control Key Lock Command: t p, Local Key Operation Lock] Command: t o
View all LG 22XE1J manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
44. Remote Control Key Lock (Command: t p) Configures the settings of the product's remote control key. Transmission (t)(p)( )(Set ID)( )(Data)(Cr) Data 00: U nlocks all keys 01: L ocks all keys except Power key 02: L ocks all keys Acknowledgment (p)( )(Set ID)( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. 45. [Local Key Operation Lock] (Command: t o) Configures the local key operation settings of the product. Transmission (t)(o)( )(Set ID)( )(Data)(Cr) Data 00: U nlocks all keys 01: L ocks all keys except Power key 02: L ocks all keys Acknowledgment (o)( )(Set ID)( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. * This feature may not be available for all models. 93 46. Status Check (Command: s v) Checks the current signal of the product. Transmission (s)(v)( )(Set ID)( )(Data)( )(FF)(Cr) Data 02: C heck whether there is a signal 03: The monitor is currently in PM Mode 07: C hecks whether the Top, Bottom and Main temperature sensors are functioning normally. 09: F an Speed 10: R GB Sensing OK/NG (screen fault detection) 16: Check the humidity value 17: C heck the value of the intensity of illumination 18: C heck the status value of the slope of the product Acknowledgment (v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x) Data 02 (when a signal is found) Data1 00: N o signal 01: S ignal present Data 03 (when the monitor is currently in PM mode) Data1 00: S creen is on 01: S creen is off 02: S creen Off Always is activated 03: S ustain Aspect Ratio is activated 04: S creen Off & Backlight On is activated Data 07 (when checking whether the Top, Bottom and Main temperature sensors are working properly) Data1 00: A ll temperature sensors are faulty 01: Top normal, Bottom faulty, Main faulty 02: Top faulty, Bottom normal, Main faulty 03: Top normal, Bottom normal, Main faulty 04: Top faulty, Bottom faulty, Main normal 05: Top normal, Bottom faulty, Main normal 06: Top faulty, Bottom normal, Main normal 07: A ll temperature sensors are normal Data 10(when executing Screen Fault Detection) Data 1 00: Screen Fault Detection result NG 07: Screen Fault Detection result OK * When screen Fault Detection is set to Off or not supported, execution results are rendered "NG." Data 16(for checking the humidity value) Data 1 0~100: Reads the %RH value of the current humidity (indicated as a Hex value). Data 17(for checking the value of the intensity of illumination) Data 1 1~1000: Reads the Lux value of the current intensity of illumination (indicated as a Hex value). Data 18(for checking the status value of the slope of the product) Data 1 00: 0 degrees 01: 90 degrees 02: 180 degrees 03: 270 degrees 04: Fallen forward 05: Fallen backward ENGLISH