LG 23LX1RV Owners Manual - Page 15
VCR Setup - tv manual
View all LG 23LX1RV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation External Equipment Connections VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna cable TV Back panel 1 2 ANT IN ANT OUT S-VIDEO OUT (R) AUDIO (L) VIDEO IN VCR 1 Connect the RF antenna out socket of the VCR to the Antenna socket on the set. 2 Connect the antenna cable to the RF antenna in socket of the VCR. 3 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. 4 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) When connecting with a RCA cable TV Back panel 1 ANT IN ANT OUT S-VIDEO OUT (R) AUDIO (L) VIDEO IN VCR 1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) 3 Select Video input source with using the TV/AV button on the remote control. • If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set. 15