LG 23LX1RV Owners Manual - Page 43

DVD operation DVD Menu options - AUDIO Each DVD disc has a variety of audio output options. Set the player's AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG AUDIO Dolby Digital DTS MPEG Sample Freq. DRC Vocal G Bitstream PCM F Prev. D E Move G Select DVD-V DivX • Bitstream: Select Bitstream if you connect the DVD Player's DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. • PCM (Pulse Code Modulation): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital, DTS or MPEG will be automatically downmixed to two-channel PCM audio. 1 Press the MENU button twice and then use the D / E button to select AUDIO. 2 Press the G button and then use D / E button to select Dolby Digital / DTS / MPEG. 3 Press the G button and then use D / E button to select Bitstream or PCM. 4 Press the ENTER button. 5 Press the EXIT button to resume normal playback. Sample Freq. (Frequency) DVD-V AUDIO Dolby Digital DTS MPEG Sample Freq. DRC Vocal G 48KHz 96KHz - If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further processing. Check the documentation for your amplifier to verify its capabilities. F Prev. D E Move G Select 1 Press the MENU button twice and then use the D / E button to select AUDIO. 2 Press the G button and then use D / E button to select Sample Freq.. 3 Press the G button and then use D / E button to select 48KHz or 96KHz. 4 Press the ENTER button. 5 Press the EXIT button to resume normal playback. 43