LG 32LC2D Owner's Manual (English) - Page 31

Screen Setup for PC mode - When RGB is connected to PC input and select the RGB-PC, this function is used. - When HDMI/DVI is connected to PC input and select HDMI/DVI input, this function is used. - In RGB-DTV mode, SIZE and PHASE is not available. - After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. * Adjustment for screen Position, Size, and Phase 4 5 6 7 8 9 0 FLASHBK EZ PIC EZ SOUND SAP ADJUST ADJUST APM FREEZE POSITION G SIZE PHASE RESET Adjust Close D F G E Installation Mini Glossary Position This function is to adjust picture to left/right and up/down as you prefer. Size This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. 1 Press the ADJUST button and then use D / E button to select POSITION, SIZE, or PHASE. 2 Press ENTER button and then use D / E / F / G buttons to make appropriate adjustments. • The PHASE adjustment range is -16 ~ +16. (In HDMI/DVI-PC mode, PHASE is not available.) • The SIZE adjustment range is -30 ~ +30. 3 Press ENTER button. * Initializing (Reset to original factory values) 4 5 6 7 8 9 0 FLASHBK EZ PIC EZ SOUND SAP ADJUST ADJUST APM FREEZE POSITION SIZE PHASE RESET G Initialize Settings Adjust Close - To initialize the adjusted values 1 Press the ADJUST button and then use D / E button to select the RESET option. 2 Press ENTER button and then use F / G button to select Yes. 3 Press ENTER button. 31