LG 47WV30 Owners Manual - Page 28

Network Status, Network Setting, Network, Status

Page 28 highlights

28 ENTERTAINMENT ENEGNLGISH NOTE yyIf you want to access the Internet directly on your display, the internet connection should always be on. yyIf you cannot access the Internet, check the network conditions from a PC on your network. yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yyIf you do not complete the network settings, the network may not work properly. yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.) yyThe use of a "Router" may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. Tips for Network setting yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector. yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions associated with your internet connection, or other connected equipment. yyLG is not responsible for problems within your internet connection. yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection. yyAny fees charged by an ISP including, without limitation, connection charges are your responsibility. yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display. Network Status 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to NET- WORK and press OK. 3 Press the Navigation buttons to select Network Status. 4 Press OK to check the network status. 5 When you are finished, press EXIT. Option Setting Test Close Description Return to the network setting menu. Test the current network status after setting the network. Return to the previous menu.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

28
ENG
ENGLISH
ENTERTAINMENT
y
If you want to access the Internet directly
on your display, the internet connection
should always be on.
y
If you cannot access the Internet, check
the network conditions from a PC on your
network.
y
When you use
Network Setting
, check
the LAN cable or check if DHCP in the
router is turned on.
y
If you do not complete the network set-
tings, the network may not work properly.
NOTE
Tips for Network setting
y
Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
y
Many network connection problems during set
up can often be fixed by re-setting the router or
modem. After connecting the display to the home
network, quickly power off and/or disconnect the
power cable of the home network router or ca-
ble modem. Then power on and/or connect the
power cable again.
y
Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms of
service. For details, contact your ISP.
y
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions as-
sociated with your internet connection, or other
connected equipment.
y
LG is not responsible for problems within your in-
ternet connection.
y
You may experience undesired results if the net-
work connection speed does not meet the re-
quirements of the content being accessed.
y
Some internet connection operations may not be
possible due to certain restrictions set by the In-
ternet service provider (ISP) supplying your Inter-
net connection.
y
Any fees charged by an ISP including, without
limitation, connection charges are your respon-
sibility.
y
A 10 Base-T or 100 Base-TX LAN port is required
when using a wired connection to this display. If
your internet service does not allow for such a
connection, you will not be able to connect the
display.
y
A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this display or you may be limited
to the number of devices you can connect at the
same time. (If your ISP limits sub-scription to one
device, this display may not be allowed to con-
nect when a PC is already connected.)
y
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Network Status
1
Press
MENU
to access the main menus.
2
Press the Navigation buttons to scroll to
NET-
WORK
and press
OK
.
3
Press the Navigation buttons to select
Network
Status
.
4
Press
OK
to check the network status.
5
When you are finished, press
EXIT.
Option
Description
Setting
Return to the network setting menu.
Test
Test the current network status after set-
ting the network.
Close
Return to the previous menu.