LG 50PM10 Owners Manual - Page 19

Operation Fleshtone ( RGB-DTV, and DVI-DTV Mode only) - Use Fleshtone to select the desired skin color option. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select Fleshtone. 3. Press the G button and then use F / G button to make appropriate adjustments. • The adjustment range is 0 ~ 3. 4. Press the OK button to save. PICTURE APC ACC Fleshtone G 0 Contrast 100 Brightness 55 Color 55 Sharpness 60 Tint 0 Menu Prev. sRGB (only RGB-PC, DVI-PC Modes) - If the Monitor is connected to external equipment using sRGB, set sRGB to On to adjust for the color difference. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select sRGB. 3. Press the G button and then use D / E button to select On or Off. 4. Press the OK button to save. PICTURE APC ACC sRGB G On Contrast 100 Off Brightness 55 Color 55 Sharpness 60 Tint 0 Menu Prev. Manual Picture Control (APC set to Off option) - You can adjust picture contrast, brightness, color, sharpness, and tint options to the levels you prefer. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select the desired picture option (Contrast, Brightness, Color, Sharpness, Tint). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press the OK button to save. PICTURE APC ACC Fleshtone Contrast 100 G Brightness 55 Color 55 Sharpness 60 Tint 0 Menu Prev. Owner's Manual 19