LG A927KVMS Owners Manual - Page 14

ENGLISH us_main.book.book Page 13 Wednesday, May 13, 2020 4:20 PM 3 Assemble the charging station onto the top of the floor stand pipe. INSTALLATION 13 4 Connect the power adapter to the port on the back of the charging station. 7 Plug the power cord into the power outlet. Using Double-Sided Tape to Secure the Appliance 1 Use the double-sided tape a to attach the wall anchoring block b to the charging station. • Remove the center section of double-sided tape before attaching it to the wall anchoring block. 5 Drill a hole in the wall and insert the drywall anchor b if needed. • Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location. • For drywall anchor: use 1/4″ (6.5 mm) drill bit • For concrete or wall stud: use 1/8″ (3 mm) drill bit • If screwing into drywall, use the drywall anchor. 2 Attach the second piece of double-sided tape to the other side of the wall anchoring block to secure it to the wall. • Do not use double-sided tape on wallpaper. 6 Align the wall anchoring block c of the chanrging station, and fix the charging station to the wall by tightening the anchoring screw d all the way. Wall-Mounted Installation For wall-mounted installations, the charging station must be attached securely to the wall using the provided (short) wall anchoring screws. • The detachable nozzle storage cannot be attached to the charging station in a wallmounted installation.