LG A927KVMS Owners Manual - Page 15

us_main.book.book Page 14 Wednesday, May 13, 2020 4:20 PM 14 INSTALLATION 1 Connect the power adapter to the port on the back of the charging station. 2 Drill 2 holes and insert the drywall anchors (if needed) at least 3.25 ft (1 m) from the floor and near enough to easily reach a power outlet. • Before drilling, make sure that there are no pipes or electrical wires inside the wall at the desired location. • For drywall anchor: use 1/4″ (6.5 mm) drill bit • For concrete or wall stud: use 1/8″ (3 mm) drill bit • If screwing into drywall, use the drywall anchors. 1 Connect the power adapter to the port on the back of the charging station. 2 Place the charging station on a hard and level floor. 3 Separate the extension pipe and nozzle from the product body before charging or storing the appliance. 
GU 4 Plug the power cord into the power outlet. CAUTION • Leaving the appliance on a level floor for a long time with the extension pipe and nozzle attached may damage the appliance. 3 Attach the charging station to the wall with the wall anchoring screws. 4 Plug the power cord into the power outlet. Compact Installation For safety and convenience, install the charging station using the self-standing or wall-mounted installation methods. If you choose not to install the charging station, place it on a level floor for charging or storage. Assembling the Appliance Follow these steps to safely assemble the appliance. 1 Firmly attach the extension pipe c, nozzle d, or tool onto the product body a. • To detach the extension pipe, press the extension pipe release button b.