LG BP520 Owners Manual - Page 26
System Setting, Settings, Initial setup
View all LG BP520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
System Setting 26 System Setting Settings Initial setup When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use W/S/A/D to select a display language and press ENTER (b). 5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. 6. Select [Next] and press ENTER (b) to apply network settings. 3 3. Read and prepare the preparations for the network settings and then press ENTER (b) while [Start] is highlighted. Network connection status is displayed on the screen. For details on network settings, refer to "Connecting to your Home Network" on page 20. 7. Check all the settings that you have set in the previous steps. If wired network is connected, the network connection setting will automatically be finished. 4. All available networks are displayed on the screen. Use W/S to select [Wired Network] or desired SSID of wireless network and press ENTER (b). Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use A/D to select [Previous] and press ENTER (b). If you have security on your access point, you need to input the security code as necessary.