LG DLE2350W Owner's Manual - Page 12

LEVELING THE DRYER wWARNING • To reduce the risk of injury to persons , adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. • The appliances are heavy. Two or more people are required when installing the dryer. • Failure to follow all of the safety warnings in this manual could result in property damage, injury to persons or death. To ensure that the dryer provides optimal drying performance, it must be level. To minimize vibration, noise, and unwanted movement, the floor must be a perfectly level, solid surface. NOTE: Adjust the leveling feet only as far as necessary to level the dryer. Extending the leveling feet more than necessary can cause the dryer to vibrate. Level • All four leveling feet must rest solidly on the floor. Gently push on the top corners of the dryer to make sure that the dryer does not rock from corner to corner. If you are installing the dryer on the optional pedestal, you must use the leveling feet on the pedestal to level the dryer. The dryer leveling feet should be fully retracted. 2 Use an adjustable wrench to turn the leveling feet. Turn clockwise to raise the dryer or counterclockwise to lower it. Raise or lower the leveling feet until dryer is level from side to side and front to back. Make sure that all 4 leveling feet are in firm contact with the floor. Leveling Feet 1 Position the dryer in the final location. Place a level across the top of the dryer. OPTIONAL ACCESSORIES For these and other LG products, contact your local LG dealer, or visit our Web site at www.lg.com. Pedestal (sold separately) Stacking Kit (sold separately) Side vent kit (sold separately) Kit # 383EEL9001B LP CONVERSION KIT Use the LP CONVERSION KIT for changing the dryer gas connections from Natural Gas to Liquefied Propane Gas NOTE: Installation of the LP conversion kit must be performed by a qualified service professional. Kit # 383EEL3002D 12