LG DLEX9000V Owners Manual - English Spanish - Page 19
Latch, Cap L, Harness, Connector, Hinge Hole
View all LG DLEX9000V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH INSTALLATION 19 3FWFSTJOHUIF$BCJOFU$PNQPOFOUT 1. Remove the two screws and the latch assembly from the left side of the opening. 2. Rotate the latch assembly and remount it on the right side of the opening with the two screws. 3. Switch the two caps. Untie the twist tie and remove the small cap from the side of the wire harness on the top right of the cabinet. Make sure the wire harness does not slip back into the cabinet. 4. Remove the left cap by gently prying it up with a flat blade screwdriver, being careful not to scratch the paint. Disconnect the wire harness attached to the cap by pressing the tabs on either side. 5. Attach the left cap to the wire harness on the top right of the cabinet. Snap the cap into place. 6. Attach the twist tie and the small cap removed in step 1 to the side of the wire harness on the bottom left of the cabinet. The wire harness will be attached to the harness in the door. 7. Unscrew the four decorative screws from the left side of the cabinet and insert them into the matching holes on the right side of the cabinet. Cap L .PVOUJOHUIF%PPS 1. Align the hinge with the mounting holes. 2. While supporting the door, fasten the four hinge screws. Latch 'JOBM$IFDL 1. Check that the door closes and latches properly. Cap L WWARNING #FTVSFUPTVQQPSUUIFXFJHIUPGUIFEPPSXIJMF inserting the hinge screws. 1SFQBSJOHUP3FNPVOUUIF%PPS 1. While supporting the door, move the door into position with the hinge on the left side. 2. Connect the wire harness from the hinge to the connector on the lower left side of the cabinet. Hinge Hole Harness Connector