LG DLEX9000V Owners Manual - English Spanish - Page 29

Three-wire connection for electric dryers, Power cord

Get LG DLEX9000V PDF manuals and user guides View all LG DLEX9000V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

ENGLISH INSTALLATION 29 Connecting Electric Dryers (cont.) USA only WWARNING t$POOFDUUIFQPXFSDPSEUPUIFUFSNJOBMCMPDL $POOFDUFBDIQPXFSDPSEXJSFUPUIFUFSNJOBM CMPDLTDSFXUIBUIBTUIFTBNFDPMPSFEXJSF'PS FYBNQMF DPOOFDUUIFCMBDLQPXFSDPSEXJSFUPUIF UFSNJOBMCMPDLTDSFXXJUIUIFCMBDLXJSF'BJMVSF UPGPMMPXUIFTFJOTUSVDUJPOTNBZSFTVMUJOBTIPSU  PWFSMPBE GJSFPSEFBUI t(SPVOEJOHUISPVHIUIFOFVUSBMDPOEVDUPSJT QSPIJCJUFEGPS  OFXCSBODIDJSDVJUJOTUBMMBUJPOT   NPCJMFIPNFT   SFDSFBUJPOBMWFIJDMFT BOE  BSFBTXIFSFMPDBMDPEFTQSPIJCJUHSPVOEJOH UISPVHIUIFOFVUSBMDPOEVDUPS Three-wire connection for electric dryers: Power cord t"XJSFDPOOFDUJPOJT/05QFSNJUUFEPOOFX construction after January 1, 1996. t"6-MJTUFETUSBJOSFMJFGJTSFRVJSFE 1. Remove the terminal block access cover on the upper back of the dryer. Install a UL-listed strain relief into the power cord through-hole; then thread a ULlisted, " 7 XJSF "8(NJOJNVN DPQQFS conductor power cord through the strain relief. t6TFB" 7 6-MJTUFEQPXFSDPSEXJUI "8(NJOJNVNDPQQFS conductor and closed loop or forked terminals with upturned ends. 2. Attach the two hot leads of the power cord to the outer terminal block screws. Attach the neutral wire to the center terminal block screw. Connect the external ground (if required by local codes) to the green ground screw. 5*()5&/"--4$3&844&$63&-:. Reinstall the terminal block access cover. Ground Screw Hot  #MBDL Neutral (White) Hot (Red) White Wire from Dryer harness External Ground Wire (If required by local codes) Terminal #MPDL UL-Listed Strain Relief UL-Listed 3-Wire Power Cord

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
29
ENGLISH
Connecting Electric Dryers (cont.)
USA only
WARNING
Three-wire connection for electric dryers:
Power cord
construction after January 1, 1996.
1.
Remove the terminal block access cover on the
upper back of the dryer. Install a UL-listed strain relief
into the power cord through-hole; then thread a UL-
listed,
conductor power cord through the strain
relief.
conductor and closed loop or
forked terminals with upturned ends.
2.
Attach the two hot leads of the power cord to the
outer terminal block screws. Attach the neutral wire to
the center terminal block screw. Connect the external
ground (if required by local codes) to the green
ground screw.
.
Reinstall the terminal block access cover.
UL-Listed
Strain Relief
UL-Listed
3-Wire Power
Cord
Terminal
Ground
Screw
Neutral
(White)
Hot
Hot
(Red)
External Ground
Wire (If required
by local codes)
White Wire
from Dryer
harness
INSTALLATION