LG HBLG1003R Service Manual - Page 17

Service Manual, Disassembly

Get LG HBLG1003R PDF manuals and user guides View all LG HBLG1003R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

3. CAPACITOR 1. Remove the control box. 2. Open the top cover from the control box. (See Figure 26) 3. Pull out the capacitor from the control box. 4. Disconnect all the leads of capacitor terminals. 5. Re-install the components by referring to the removal procedure, above. HEAT DEFROST Figure 26 Disassembly 4. POWER CORD 1. Remove the control box. 2. Open the top cover from the control box. 3. Disconnect the front panel from the control box. (See Figure 27) 4. Disconnect two leads from the capacitor and relay. COOL FAN DRY INDOOR FAN HEAT DEFROST DESIRED ESNAEVREGRY PRUEARSAUYTITRFAOIRETR 5. Pull out the power cord. 6. Re-install the component by referring to the above removal procedure, above. (Use only one ground-marked hole for ground connection.) 7. If the supply cord of this appliance is damaged, it must be replaced by the special cord. (The special cord means the cord which has the same specification marked on the supply cord attached at the unit.) Figure 27 Service Manual 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
Service Manual
17
Disassembly
3
.
CAPACITOR
1. Remove the control box.
2. Open the top cover from the control box.
(See Figure 26)
3. Pull out the capacitor from the control box.
4. Disconnect all the leads of capacitor terminals.
5. Re-install the components by referring to the
removal procedure, above.
4
.
POWER CORD
1. Remove the control box.
2. Open the top cover from the control box.
3. Disconnect the front panel from the control box.
(See Figure 27)
4. Disconnect two leads from the capacitor and relay.
5. Pull out the power cord.
6. Re-install the component by referring to the above
removal procedure, above.
(Use only one ground-marked hole for ground
connection.)
7. If the supply cord of this appliance is damaged, it
must be replaced by the special cord.
(The special cord means the cord which has the
same specification marked on the supply cord
attached at the unit.)
DEFROST
HEAT
Figure
27
Figure
26