LG LDF5545BD Additional Link - Owner s Manual - Page 14
Preparing Cabinet Opening - warranty
View all LG LDF5545BD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH Preparing Cabinet Opening This dishwasher is designed to fit a standard dishwasher opening. An opening may be needed on both sides to route plumbing and electrical connections. INSTALLATION 13 WARNING ••Don't use existing holes unless they are in the target area. Otherwise, the water supply and drain hose may be damaged by being crushed or kinked. 24" (610 mm) min. 33 1/2" (851 mm) min. 24" (610 mm) min. CAUTION ••Failure to properly locate the hole for the water and drain lines may prevent the dishwasher from installing flush with the cabinets and could result in kinked or damaged lines. Installation damage is not covered by the warranty, and leaks caused by improper installation may result in property damage. For flush installations only, you may remove the cabinet brace inside the cabinet. 1 Select a location as close to the sink as possible for easy connections to water and drain lines. 2 To ensure proper drainage, install the dishwasher no more than 12 ft. (3.65 m) from the sink. 3 If installing the dishwasher in a corner, leave a minimum of 2" (50 mm) between the dishwasher and the adjacent wall. 4 To allow for proper clearance of plumbing and electrical, use the template included with the literature to determine the clearance on the side of the cabinet where the cabinet meets the back wall. Using a 2 1/2" diameter hole saw, drill a hole in the target area as shown on the template. Cabinet brace 9 4