LG LP1210BXR Owner's Manual - Page 11

English HOW TO USE USING THE CONTROLS FAN Pressing the FAN button cycles the circulation fan speed from low (F1) to medium (F2) to high (F3).The selected fan speed will be shown in the LCD display. The function can be used in either COOL or FAN modes. When changing fan speeds, there is a brief delay before the fan motor changes speed. / (TEMP/TIMER) In COOL and DRY modes, the / (TEMP/TIMER) buttons adjust the set temperature up to 86°F or down to 60°F , in one degree increments. The temperature can be switched between degrees Fahrenheit and degrees Celsius, pressing the button and button at the same time,or pressing °C °F button on the remote. When the TIMER function is selected, use the / (TEMP/TIMER) buttons to adjust the delay time from 1 to 24 hours, in one hour increments. If you press and hold the / (TEMP/TIMER) buttons, the set temperature or time will change automatically after a few seconds. NOTE: The displayed temperature is the SET temperature, not the room temperature.In COOL, DRYor ENERGY SAVER mode, the thermostat in the air conditioner will run the compressor until the set temperature is reached, then cycle the compressor on and off to maintain the set temperature. TIMER When theTIMER function is selected, you can set the air conditioner to either automatically turn OFF or turn ON after a delay of up to 24 hours. The display will show 0.Use the / (TEMP/TIMER) buttons to adjust the delay time from 1 to 24 hours, in one hour increments. To set an automatic off delay, press the TIMER button while the air conditioner is running and use the / (TEMP/TIMER) buttons to adjust the delay time. The air conditioner will automatically turn OFF after the set delay. To set an automatic on delay, press the TIMER button while the air conditioner is off and use the / (TEMP/TIMER) buttons to adjust the delay time. The display will show the number of hours remaining until the unit is set to come on. The air conditioner will automatically turn ON after the set delay. If you want to know how many hours you have setted, press the TIMER button and then you can see the time through the LCD display. If you want to change the set timer,press the TIMER button and adjust the time when the number is flickering. To cancel the Timer function,one method is press the TIMER button and adjust the number to"0" when the number is flickering,then the function will be canceled in a few seconds. Another better method is Press the TIMER button and Press this button again when the number is still flickering. NOTE: Do not unplug the air conditioner when using the timer function. 11